Most of Ray-Ban sunglasses and eyeglasses have the size measurement printed on the inside of the left temple. Usually, this consists of three numbers (though sometimes only the first two are printed) similar to this: 50 20 150. The third number in the sequence represents the temple length.
In this post
How do you read Ray-Ban lens sizes?
In any event, the first number (in millimetres) is the lens diameter, the second is the width of the bridge, and the third (if any) is the length of the temple arms. The lens diameter is the width of the lens at its widest point, measured in a straight line, not following any lens curvature.
Does Ray-Ban have sizes?
The Three Ray-Ban Wayfarer sizes are 52, 55 and 58. 55 is a standard fit and will fit most faces. 58 is much larger. Finally, the size 52 is the smallest size available.
Where is the model number on Ray-Ban sunglasses?
left temple arm
The model number on a pair of genuine Ray-Ban sunglasses will be found inside the left temple arm of the sunglasses . It will start with RB and be clearly etched and properly centred and aligned with the arm.
How do I read my Ray-Ban Code?
These numbers on Ray-Bans, ranking from 0 to 4, will tell you what conditions your lenses are recommended for. 0 being for cloudy conditions to 4 being for exceptional brightness. The letter will tell you if the lenses are normal/non-polarized lenses(N), polarized(P), or photo-chromatic(F).
What does Ray-Ban size mean?
The first one is the Model name, then the Lens width and Bridge width. There is usally a third number which represents the Temple Length, which is the measurement in millimeters of the ‘arms’ of the frame. Sometimes there is also a fourth number which is the Lens Height. Each of these numbers is measured in mm.
How do you read sunglasses size?
If you look on the inside of your glasses, you’ll find a number that looks like: 52 18 135. This information shows you the size of your glasses: the lens diameter, the bridge width and the side length — all measured in millimetres. The length of the side is usually one of three standards — 135, 140 or 145mm.
How do I know my sunglass size?
You can measure the distance between your temples to find the perfect sunglass size for your face. Start by looking into a mirror and then placing a straight ruler so it is lined up with each temple. Measure the distance across your face, from one temple to the other. That distance is the best frame size for your face.
How do I know the size of my aviator?
Most of our sunglasses and eyeglasses have the size measurement printed on the inside of the left temple (the piece that goes behind your ear). This usually consists of three numbers – sometimes only the first two are printed – similar to this: 50 20 150.
How do I identify my glasses model?
Prescription glasses or optical grade glasses always have their model name and model number printed on the inside of either the right or left temple (arm) of the frame; model names and model numbers are not always printed in the same place.
Do all Ray-Bans have serial numbers?
One of the most reliable methods for spotting genuine Ray-Bans is to look for the serial number. This can be found on the inside of the left arm of the sunglasses, unless they’re aviators, in which case the arms are too thin to fit a number.
What are the 3 numbers on glasses?
1) The eye size number (it is the size of the lenses on your frame). 2) The bridge size number (the distance between the lenses). 3) The temple length number (it is the size of that part of your eyeglass frame, which rests upon your ears).
What do numbers mean on sunglasses?
Answer: They’re size measurements in millimeters.
They’re measurements. The first number (e.g. 52), is the width of the lenses. The second number (e.g. 20) is the distance between the lenses. And the third number (e.g. 135) is the complete length of the temple arm, which includes the portion that goes behind your ear.
What do the numbers on my glasses mean?
The numbers beneath the frames reflect the SIZE MEASUREMENTS in millimeters (mm). THE FIRST NUMBER (ex.54) = the width of the lenses. THE SECOND NUMBER (ex.15) = the distance between the lenses. THE THIRD NUMBER (ex.140) = the length of the temple arm including the portion going behind the ear. The TOTAL WIDTH (ex.
What does 55mm mean on sunglasses?
Temple length
| Fit | Eyeglasses | Sunglasses |
|---|---|---|
| Small | 50mm and below | 55mm and below |
| Medium | 51mm–54mm | 56mm–64mm |
| Large | 55mm and above | 65mm and above |
How do I know my sunglasses size online?
You can easily found the size of frame by looking on the inside of your eyeglass temples (arm pieces). Below you’ll find a quick guide to helping you identify your eyeglasses. This is the only information you need when ordering your eyeglass or sunglass frames.
What does the mm number mean on sunglasses?
The eye size number measures the width of the lens, measured from the bridge, in millimeters. The bridge width is the distance between the lenses in millimeters. And the third number is the length of the temple in millimeters.
What is Ray-Ban aviator size?
58mm
The Aviator 58mm Eyesize is considered a “Standard” size by Ray-Ban.
What size are large Ray-Ban Aviators?
“Large” – This is the biggest size that the Ray-Ban Aviator RB3025 sunglasses come in, at a width of 62mm lens. Therefore, is considered the “large” size. The 62mm size is not available across all colours for this model.
How can you tell if they are real Ray Bans?
Some genuine Ray-Bans have plastic lenses. Also, check out the Ray-Ban logo. Ray-Ban places one prominent logo on the upper right (your left) lens, and one subtle “RB” etching on the left (your right) lens. On fakes, the logo will look blurry, be out of place, or even scratch off.