How to resize + fix a too long belt or purse strap
- Use a small clear or colored elastic. Works best for: skinny belts or straps, or, black straps that are easy to match with black rubber bands.
- Try a Belt Loopy.
- Style the tail into a single or pretzel loop.
- Have a cobbler shorten the strap.
In this post
How do you shorten a belt?
Unscrew the screw located at the buckle end to disassemble your belt. In case your belt does not have a screw, use scissors to snip into the back of the leather holding the buckle. Cut fully across and remove the excess leather tab, then snip through the thread and cut open the remaining flap to detach the buckle.
How do you know if a belt is too long?
Typically, the belt strap should end between your first and second belt loop. If you have enough extra material to loop it through the second belt loop, it’s too long. If your belt doesn’t extend through the first belt loop, it’s too short.
Can a belt be made smaller?
The easy way to shorten a belt is just to cut it off at the end with the holes, but what if you like the tail as it is? With most belts, you can also shorten them from the buckle end, preserving the finish of the tail. It’s only very slightly more work.
How much does it cost to shorten a belt?
Belts can be shortened 2″, 4″, 6″ or any length above 6″ in one-inch increments. Our normal turnaround is 1-2 business days after we receive the belt, and the cost is $20 per belt, which includes our labor and the cost of shipping the belt back to you.
How do you shorten a belt with a dress?
Finally, the belt method easily restyles any loose dress a few inches shorter. Simply cinch on your belt and tug a bit of fabric up over the top of the belt. It gives you a nice, casual shape and makes the skirt of the dress a couple of inches short!
Can a cobbler shorten a belt?
Our expert cobblers can shorten and lengthen your favorite belts to ensure they fit your waistline like a glove. No matter what fix you need to make, we’ll work closely with you to determine which measurements make sense for your belt lengthening or shortening repair.
How far should a belt stick out?
HOW SHOULD THE BELT LOOK ONCE IT’S FASTENED. Once it’s fastened, the belt should always have to be a few inches of leather sticking out. This should be just enough to tuck it under the first belt loop or the loop on the belt (if it has one).
Who can cut my belt?
We recommend taking our belts to a professional shoe cobbler who will be able to measure and cut any belt in just a few minutes.
Can leather belts be made smaller?
Placing the belt on a sturdy work surface, use a screwdriver to unwind the screw and unhook the buckle. If you need to shorten the belt by three centimetres, for example, measure down from the buckle-end of the belt and draw a straight line with the pencil. Cut along the line with scissors, reserving the trimmed part.
How much does it cost to get your pants taken in?
Shorten or lengthen pant or skirt hem: $14-$16 (or $7-$8 a leg) Taper unlined pant legs: $14.20. Shorten sleeves on shirt/coat/jacket: $18-$30. Take in or let out waistband of pants or skirt: $14-$20.
Can I shorten a Gucci belt?
Remember, you can always widen the holes but you can’t make them smaller. Measure the distance between the holes and mark that spot on your belt with a pencil. Then make sure it’s centered in the middle of the belt.
What can I use instead of a belt?
Alternatives to Wearing a Belt
- Suspenders. Suspenders are now an icon of hipster clothes and quirky style, but they’re not an invention of the too-cool crowd.
- Hikers Hidden Suspenders.
- BeltBro.
- Side Tab Adjusters.
- PantsProp.
- Well-Tailored Pants.
- Elastic Waistband.
How many holes should be left on a belt?
five holes
Therefore, the middle belt hole (or third hole, since most belts have five holes) is the ideal belt hole to use.
Where should a belt sit?
As expected, men’s belts go from right to left with the end of the belt going through the buckle and ending up on the left side of the fly or zipper.
What is the right length for a belt?
An easy way to determine belt size is to simply “add 2″ to your off-the-rack trouser size. For example, if you wear a 36” waist trouser, then a 38 belt size will be a safe bet. Most will find this simple formula works best for pants worn at a traditional height–close to the natural waistline.