Standard eyelet diameter sizes include: 0.25”, 0.375”, 0.4375” and 0.625”. Standard grommet diameter sizes include: 0.25” (plastic) and 0.5” (plastic).
In this post
What is eyelet tag?
An eyelet is a metal reinforcement offers a dual purpose when added to your swing tag.
What is the difference between a grommet and an eyelet?
A grommet is very similar. Grommets are typically used for more heavy duty materials and usually are bigger in size. Eyelets are often used to finish off the opening for a drawstring casing. A buttonhole will serve the same purpose, but an eyelet can be a professional looking detail.
What is the smallest eyelet?
1/16 Eyelets. These are the tiny tiny ones.
What size do eyelets come in?
Grommet and Eyelet Sizing Chart
| Size | Outside Diameter (in millimeters) | Inside Diameter (in millimeters) |
|---|---|---|
| #0 (1/4″) | 11.5mm | 6mm |
| #1 (5/16″) | 17.5mm | 7mm |
| #2 (3/8″) | 19mm | 9mm |
| #3 (7/16″) | 22mm | 12mm |
What are the sizes of grommets?
What Are The Standard Grommet Sizes? The most common grommets for banner sizes are 3/16 of an inch, 3/8 of an inch, one half of an inch, 1 inch, 7/16 of an inch, three, in the most widely used size being a grommet is 3/8 of an inch.
What’s the difference between a rivet and a grommet?
Aside from their appearance, grommets and rivets are used for different purposes. Grommets are used to reinforce holes while subsequently creating a safe passage for wires, cables and hoses. Rivets are used to permanently hold two or more parts together.
What are the metal holes in fabric called?
A grommet is a two-part piece of hardware that is pressed together through a pre-punched hole in a piece of fabric. A quality grommet is normally made from brass or stainless steel.
Are all eyelets the same size?
The diameter of the inside of an eyelet ring (or grommet) is normally 40mm. The ideal diameter of a metal curtain pole for eyelets is 28mm. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.
How big is a #2 grommet?
Grommets and washers are assigned a standard sizing number from #00 to #4.
Grommet Size Chart.
| Size | ID (inner diameter) | OD (outer diameter) |
|---|---|---|
| #1 | 0.454 | 0.790 |
| #2 | 0.514 | 0.893 |
| #3 | 0.528 | 0.968 |
| #4 | 0.642 | 1.118 |
Which is stronger eyelet or grommet?
Grommets are much stronger than eyelets and used in situations that call for a more reinforced and longer lasting hold, such as permanent signage and heavy curtains or drapes.
What Are Grommets? Grommets are metal rings inserted into holes through vinyl material, collared on each side to keep them held securely in place. They are used to prevent tearing or abrasion of material from the support line being routed through the holes in the vinyl material.
What size are the holes in eyelet curtains?
Eyelet Size
Standard ready-made curtains tend to use a 40mm eyelet and as such we could recommend a 28mm curtain pole. A 35mm pole will fit but you may just need to help your curtains along the pole. A 50mm eyelet is recommended for a 35mm curtain pole.
Are there different types of grommets?
There are three primary types of grommets: plain, rubber, and plastic.
Are there different size grommets in curtains?
Sizing. A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.
How do I know what size rubber grommets to buy?
One way that you can determine what size rubber grommet you need is to measure the panel. Specifically, you will need to determine the thickness of the panel, the hole size where the grommet will be applied, and the size of the object that will be going through that hole.
How do you use eyelets without paper tool?
You may be able to set a small eyelet by placing the eyelet in fabric between the jaws of a handheld die punch. The back of the eyelet should rest against the die of the hole punch. Squeeze gently but firmly to fold it on itself.
Do eyelets have two parts?
There are usually two parts to eyelets and when pressure is added to connect the two, you end up with an enclosed hole in the fabric.
What tool is used to make eyelets in the fabric to be embroidered?
Stiletto. It is the tool used in making eyelets. It is usually made of wood, bone or metal.
Are eyelets and rivets the same?
Grommets and Eyelets are used to strengthen and reinforce a hole that needs to withstand friction from everyday use, making them an ideal option for straps and cords. Eyelets and Grommets are also used as decorative accents. Rivets are used for attaching straps, belting, and fabrics, and can be used as accents.
What do you call a rivet with a hole?
A flush rivet takes advantage of a countersink hole; they are also commonly referred to as countersunk rivets. Countersunk or flush rivets are used extensively on the exterior of aircraft for aerodynamic reasons such as reduced drag and turbulence.