Tying wire or tie wire is a strong yet pliable black annealed 16 gauge 1.6mm steel wire extensively used in construction for fixing steel reinforcing bars and mesh securely together in preparation for the concrete to be poured. Tying wire is also used to attach concrete and wire spacers.
In this post
What is rebar tie wire used for?
Rebar tie wire, also known as rebar tying wire, is made from the softest low carbon annealed steel wire. With fully galvanized and PVC coating on the surface, it offers excellent flexibility and corrosion resistance mainly used for tying and bundling reinforcing steel bar, supporting plants in gardens.
How strong is tie wire?
How Strong Is Tie Wire？ Tie wire is very flexible. It can stretch from 50,000 – 65,000 psi. it is very strong and does not break easily and can be used as a general fastener for construction work.
How do you connect tie wires?
Twist the wire 1-2 times by hand firmly over the top of the rebar intersection. Grip the twisted wire with your pliers and make 4-5 more twists. Snip off the excess wire and bend the twisted wire out of the way. Single ties are usually suitable for rebar intersections made on the ground.
What is tie wire electrical?
Top Definition. Tie Wire as used in the electrical construction industry is sold in coils of 12 pounds and generally made from 16 gauge black soft annealed wire. It is popular because it is both pliable and difficult to break.
What type of wire is used for concrete?
Chicken wire or wire mesh can be safely used as a reinforcement in concrete when the concrete is not used in structural or high-weight areas. The wire mesh or chicken wire can add stretching strength that concrete does not have, giving the concrete rigidity when facing specific pressures.
How strong is 16 gauge tie wire?
45- 65,000 psi
*Stainless Steel wire and other sizes are available upon request.
| Gauge | Finish | Break Strength |
|---|---|---|
| 16 | PVC Coated | 45- 65,000 psi |
| 16 | PVC Coated | 45- 65,000 psi |
What gauge is tie wire?
Most rebar tie wire is between 14 to 18-gauge. The smaller the gauge number, the thicker the wire is.
What kind of wire do you use for rebar?
16.5-Gauge Rebar Tie Wire lets you easily secure a rebar in place or tie several rebars together before you pour concrete. Its pliable annealed design ensures a snug and secure tie.
How much is a case of tie wire?
Compare with similar items
| This item TW898-USA Regular MAX TIE Wire 50 ROLL CASE | Rebar Tie Wire, Black Steel, 82 ft, PK50 | |
|---|---|---|
| Add to Cart | Add to Cart | |
| Customer Rating | (0) | 4.7 out of 5 stars (4) |
| Price | $35011 | $36999 |
| Sold By | Air Nail LLC. | Tool Barn |
Does wire make concrete stronger?
Wire mesh makes concrete more durable and increases its strength. The area in which the concrete will be laid down should be covered in mesh before pouring commences.
Can you pour concrete without wire mesh?
When it comes to concrete, you can’t avoid cracks entirely, but wire mesh reinforcement will help hold the material together when they do occur. Also, it will help evenly distribute the weight of cars on your driveway. The added strength of steel is especially crucial if your subgrade isn’t up to par.
What is the best thickness for a concrete driveway?
four inches thick
As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
Does rebar tie wire rust?
Rebar tie wire, also called rebar tying wire, it has many advantages, such as high tensile strength, weather-resistance, corrosion-resistance, anti-rust and long service life.
How many feet are in a roll of tie wire?
Tie wire is a very pliable and durable steel wire that is used by to tie reinforcing steel together. Approx. 340 Feet per Roll.
How many rolls of tie wire are in a box?
20 rolls
Black annealed steel rebar tie wire, 16.5 gauge, 3.5 pound (330 feet) bulk roll with square shaped center for rebar tying and general construction use. Each case contains 20 rolls.
How much does a roll of tie wire weigh?
3.5 lbs / roll
Features
| OCM Part No. | Gauge | Weight |
|---|---|---|
| TIW16-PVC | 16 | 3.5 lbs / roll |
How much does a box of tie wire weight?
SPECIFICATIONS:
| REBAR TIE WIRE- 16.5-GAUGE | ||
|---|---|---|
| ITEM # | PRODUCT | APPROX. WEIGHT PER BOX |
| 0606-5 | Rebar Tie Wire – Black | 70 lbs. |
Does rebar have to be grounded?
Rebar on its own doesn’t usually need to be grounded. If, however, the rebar is being used in a concrete slab you will need to ground the whole slab. This is because during a fault or lightning strike the ground and the concrete slab will be at a different potential and there may be a touch potential hazard.
Does rebar need to be tied?
Ideally, every intersection of the rebar has to be tied for maximum support. The ties do not actually make the structure strong. They prevent the rebars from getting displaced when the concrete is being poured. The tie wires should be placed at the right depth from the surface so that the rebar does not rust.
What can I use instead of rebar in concrete?
Alternatives to Rebar Concrete Reinforcement
- Stainless Steel Concrete Reinforcement. Stainless steel rebar is often touted as a replacement for standard steel rebar.
- Engineered Bamboo Reinforcement.
- Glass fiber reinforced polymer (GFRP) Rebar.
- Plastic Fiber.
- Helix Micro Rebar Concrete Reinforcement.
- Many Options.