In ski boots, ‘last size’ refers to the boots’ width at its widest point, the forefoot or ball of your foot. Until recently, high-performance and racing boots had narrow (95 – 98mm) lasts, while beginner and intermediate boots typically had wide (102 -106mm) lasts.
In this post
What is last and flex in ski boots?
The flex rating of a ski boot is a metric that specifies the stiffness of the boot. The flex rating is generally between 60 for the softest boots and 140 or more for race boots and other high-performance boots.
What does boot last mean?
Boot lasts, or rather a shoe last, is a mold that’s used to shape a boot when it’s being constructed. While this doesn’t seem important, it’s actually one of the most important aspects of footwear construction.
How do you measure the last foot of a ski boot?
Measure from the edge of the paper to mark you made for the widest point. That is your ‘last width’ to help you find the right brand. Different brands usually fit different foot widths. If you have narrow feet, we recommend lasts ranging from 97mm up to 100mm.
Is 80 flex ski boot too soft?
Typically the softest-flexing quality boot for men is about a 90 flex and for women is 75 to 80. Intermediate skiers require a slightly stiffer boot to transfer energy quickly from the boot to the ski, but still soft enough to allow them some forward flex.
Is 130 flex too stiff?
A very stiff flex is a great option for taller, heavier or aggressive advanced to expert skiers who require a high level of responsiveness to deliver precise performance. Recreational boots top-out at around 110 flex for women and 130 flex for men, and beyond that, the range goes into racing models.
Where is the last of a boot?
“It’s the foot form that the shoe is made from, so the shape of the shoe is going to be determined by the last, whether it’s leather or fabric it’s going to assume that shape,” says Neil Munro, owner of NMF Shoes, an American factory that designs and manufactures shoes for many well-known American boot companies.
Why is a shoe last called a last?
According to the Oxford Dictionary of English, the word ‘last’ is derived from the Old English ‘læste’, meaning ‘to follow’. Today, we are used to seeing a pair of lasts, closely resembling a left and right foot.
What part of a shoe is called a last?
The shoe last is the starting point of every shoe design and has been called “the heart of the shoe.” The last is the center of the entire shoemaking process, in which the shoemaker starts with the last and then builds the shoe out from there.
What do the numbers mean on ski boots?
In general, the flex index varies between 60 and 140. The lower the number, the more flexible the boot – and the higher, the stiffer. Higher flex numbers are primarily found in high-performance or race boots. You can best feel the flex of your ski boot when bending forward.
What size is 7.5 in ski boots?
Ski Boot Size Chart
| Mondopoint (Comfort Fit) | Mondopoint (Performance Fit) | Men / Unisex (US) |
|---|---|---|
| 24.5 | 23.5 | 6.5 |
| 25 | 24 | 7 |
| 25.5 | 24.5 | 7.5 |
| 26 | 25 | 8 |
What size is 25.5 ski boot?
Mondopoint Ski Boot Size Chart
| Mondopoint (cm) | Europe | Men’s Size (USA) |
|---|---|---|
| 18.0 | 28.5 | —- |
| 24.5 | 38.5 | 6.5 |
| 25.0 | 39 | 7 |
| 25.5 | 40 | 7.5 |
How often should I replace ski boots?
about 200 skier days
—Jill K. Ski boot technology may not change as fast as ski technology, but ski boots do have a shelf life. Manufacturers say that boots should last about 200 skier days, though ski boot liners tend to pack out well before then, even before the shell begins to lose its integrity.
Do ski boots loosen over time?
Yes, your ski boots will loosen up over time. Much like other shoes, they will break in and become roomier, such as in the heel or other places where there’s more pressure from your foot.
Can you change the flex of a ski boot?
Many ski boots allow you to change the flex of the boot. Some boots have two screws in the spine (back) of the boot. Removing a bolt allows the boot to flex more.
How do I make my ski boots less stiff?
Ski harder than you usually do for about 50-60 days. They’ll soften up a bit. I put pro tour liners in my 130s a couple seasons ago. Definitely softer on the touring descent than inbounds with a wrap or the stock liner.
Why are ski boots so heavy?
Ski boots are heavy because they are constructed with rigid plastic molds that protect your feet and ankles from extreme forces as you slice through the snow at speed. Their weight also gives you more control, and different types of boots can range in their weight, comfort, and control.
How do you soften ski boot flex?
To reduce flex by 6%, remove the top rear-cuff screw of each boot with a 3mm key and insert clip (supplied with boots) in its place. Push the clip in and tap with a hammer. To reduce flex by12%, remove the bottom rear-cuff screw of each boot with a 3mm key and insert clips (supplied with boots) in their place.
What does last length mean?
This system is based on the length of the shoe last (foot-shaped template for manufacturing shoes). Measuring the last instead of a foot is easier for shoe manufactures but makes it harded for the consumers. The inner cavity of the shoe must usually be 2/3 inch longer than the foot length.
What does W on ski boots mean?
Wide Last. Wide lasted boots are best suited to skiers with wider and higher volume feet, and typically have a forefoot width of between 102 mm and 106 mm. Shop Wide Last Ski Boots.
How many types of last are there?
Based on the Uses, Lasts are also four types: • Finishing or Treeing Last • Making Last • Pullover Last ( Design Block) • Metal Last ( Mould) S. M. Murshidur Rahman, Khulna University of Engineering & Technology (KUET). 26.