What Is a Hi-Hat? A hi-hat consists of a pair of cymbals mounted to a hi-hat stand. The hi-hat stand consists of a metal frame, rod, clutch, and pedal. It’s a standard fixture of the drum kit in many styles of music including blues, rock ‘n’ roll, jazz, pop, and hip-hop.
In this post
What is the purpose of the hi-hat?
Hi-hats are used for keeping time and alternating between open/closed hats can help establish a groove. Alternating velocity (loudness) is important in making a good hi-hat groove as well.
How do you play a hi-hat on a drum set?
Hold the cymbals tight with the pedal, open the hats, quickly (almost simultaneously) strike the top cymbal, and immediately close the hats with the pedal again.
What does giving the high-hat mean?
to snub or treat condescendingly.
Why is it called a high-hat?
Hi-hats were so called because they were “high” compared to the then standard low-boy. The opening and closing resembled someone lifting their top hat. Snare wires come from the snares used to snare small game.
How high should your hi-hat be?
6″-12″
Your hi-hat cymbal should be 6″-12″ above the playing surface of the snare drum. You should be able to strike the flat playing surface or edge of the hi-hat cymbal without hitting the snare drum. Be aware that moving the hi-hat stand will alter the symmetry of the tripod forming the foundation of your posture.
How open should hi hats be?
The Hi-Hat foot should only be raised a little, about an inch, when opened. It is not necessary and in fact incorrect for the foot to be raised any higher than this. All that is required is for the foot to roll back on the pedal a little for the two cymbals to raise and separate.
What is a high-hat in music?
What Is a Hi-Hat? A hi-hat consists of a pair of cymbals mounted to a hi-hat stand. The hi-hat stand consists of a metal frame, rod, clutch, and pedal. It’s a standard fixture of the drum kit in many styles of music including blues, rock ‘n’ roll, jazz, pop, and hip-hop.
What does high-hat mean in the 1920s?
High-Hat: To snub. High Pillow: Person at the top, in charge.
What are high hats lights?
High hats are recessed lights—often called can lights—that are flush with the finished ceiling (the fixture itself is up inside the joists). High hats are terrific for illuminating large areas, where you need lots of light, such as kitchens, offices, and basements.
Why do drummers cross their arms?
Why Do Drummers Cross Their Arms? Many drummers cross their arms to allow their dominant hand to strike the hi-hat which is which is most frequently used. The hi-hat is usually placed to the left of the drummer and if right-handed, their dominant hand will need to cross over. Open-handed drumming can also be used.
Why do drummers sit behind glass?
Drummers may sit behind a drum screen or shield to help to reduce the volume of the drum kit and prevent it from overwhelming the sounds of the other instruments or vocals. Drum screens can also help to improve the sound quality of the drum kit and help the drummer to pick up certain sounds.
Why do drummers wear headphones?
Headphones make it easy for the drummer to actually listen to what’s happening by pumping the monitor feed directly into your ears. At the same time, the headphones will also suppress drum noise to improve clarity.
What frequency is high-hat?
between 300-3000 Hz
Typical hi-hats are usually between 300-3000 Hz dominant frequencies, and can extend up to 10-17k Hz for crispness, “air” and sparkle. The “shhhhhhhhh” sound is usually found at the 2-3k Hz range.
How loud should a snare mix be?
The snare is the foundation of the backbeat, and typically one of the loudest elements in the mix. Next, bring the kick fader up until it sounds almost as loud as the snare. It should be loud enough that the low frequencies are rich and powerful, but not so loud that it masks the bottom-end of the snare drum.
How do you read hi-hat music?
The hats are notated by the x note heads above the top line of the staff. The + above a note indicates playing the closed hi-hat with a stick, and the o above a note head indicates playing an open hi-hat with a stick.
What is drum crash?
A crash cymbal is a type of cymbal that produces a loud, sharp “crash” and is used mainly for occasional accents, as opposed to a ride cymbal. It can be mounted on a stand and played with a drum stick, or by hand in pairs. One or two crash cymbals are a standard part of a drum kit.
Which hi-hat is best?
7 Best Hi-Hats for 2022
- 1 Paiste Formula 602 Modern Essentials Hi Hat Cymbals 15″: Best Hi-Hats for Versatility.
- 2 Paiste Signature Dark Crisp Hi-Hat Cymbals 14″: Best Hi Hats for Recording.
- 3 Zildjian A Avedis Hi Hat Cymbals 14″: Best Vintage Hi Hats.
- 4 Zildjian K Sweet Hi Hat Pair 14″: Best Hi Hats for Value.