Busks.
Busks refers to the front closures you see on most corsets. They are considered a traditional closure and use a simple loop and stud system to keep your corset closed. We use half-inch, flexible steel busks in all of our corsets.
In this post
What is the front part of a corset called?
Busk: A specialty closure that is comprised of metal loops and studs, mounted to a pair of steel bones. This has become the standard front closure for modern corsets.
What are the parts of a corset called?
Parts of a Corset: A Quick Rundown of Corset Terminology
- Busks.
- Bones.
- Channels and Panels.
- Grommets.
- Lacing.
- Lining/Strength Layer.
- Modesty Panel.
- Shell.
Why do they put a stick down the front of a corset?
To achieve and enhance the separation of the bust, the “busk” was used. The busk was essentially a large rigid “Popsicle stick” shaped bone inserted into a casing down the center front of the corset. These busks were made from either wood, ivory, bone, or baleen and were often elaborately carved and given as gifts.
What is the triangle that comes with a corset?
A stomacher is a decorated triangular panel that fills in the front opening of a woman’s gown or bodice. The stomacher may be boned, as part of a corset, or may cover the triangular front of a corset.
What is the lacing on a corset called?
It’s called “rat tail” lacing because it’s so thin. I’ve heard it’s diffciult to source in Europe, but I’ve been able to walk into my local Fabricland (here in Canada) and find 3mm wide satin rat tail cord in a multitude of colors. It’s also quite inconspicuous and not bulky under clothing because it’s so thin.
How do you finish a corset?
Turn the edging towards the outside of the corset. Then fold the cut end around the leading edge. Fold the ribbon over the raw edge of the corset, onto the back, hiding the cut end of the ribbon. When using bias tape, all edges are raw and need to be hidden within the edging.
What are the metal things on corsets called?
A Busk is the rigid closure in the front of a corset. They are made of two long pieces of steel that can withstand the tension of corset lacing, one with eyes and the other with posts. They are available in a variety of lengths and widths.
What is a corset modesty panel?
A modesty panel, as the name implies, is an extra piece of fabric that spans this open gap beneath the corset laces, providing the wearer with added coverage, ostensibly for modesty, although many women also enjoy added comfort when grommets and laces are no longer in direct contact with their skin.
What is a busk on a corset?
As Alex Newman and Zakee Shariff in Fashion A to Z: An Illustrated Dictionary (2009) explain, the busk was: “a strip of rigid material such as whalebone, wood, ivory, shell, or, more recently, steel, set into the center front of a woman’s corset to make it flat and straight.
What is a whalebone corset?
Stays were made from baleen, which was harvested from the mouth of the Right Atlantic Whale and commonly referred to as whalebone. This material was firm but flexible and could be cut into very thin pieces without any loss of strength.
What can I use instead of boning?
Plastic cable ties can easily be cut with household scissors, making it convenient and safe to use. No wire cutters! The ends don’t need to be tipped or capped, either. Just trim them into a rounded shape and file any rough edges with a metal nail file.
What is a hip Gore?
Hip Gores.
A Hip Gore creates a larger hip measurement than the waist of the corset and is essential for the corset to fit snuggly over the hip bones whilst worn tightly around the waist.
How many layers are in a corset?
three
All Timeless Trends corsets have three fabric layers, two of which are strong cotton twill.
Can you wear a corset instead of a bra?
A corset is a great alternative to a bra, not just for aesthetic reasons, but for practical reasons too. Stylish, flattering and comfortable, corsets solve a number of the issues that many of us find with wearing bras on a daily basis.
How do you tie the front of a corset?
Loop the end away from the edge of the corset and then underneath the long part. DO NOT cross in front of the long part. Loop over the front of the long part, and through the opening you just made. If this end is the starting end, pull the loose end entirely through and tighten down the knot.
Do you need a busk in a corset?
The corset busk is optional as you can have a corset pattern with lacing at both the front and back, there are even corset patterns with closed fronts. However the majority of corsets are designed to open at the front with a busk.
What is the purpose of a modesty panel?
A modesty panel is something added to various items such as clothes or furniture for the purpose of concealment. In particular it refers to a thin board of wood or metal that is attached to the front of a desk, drafting table, electronic organ, or similar item, to shield legs, ankles, or feet from view.
What is busk closure?
BRASS or SILVER Busk. Busks refers to the front closures you see on most corsets. They are considered a traditional closure and use a simple loop and stud system to keep your corset closed. We use half-inch, flexible steel busks in all of our corsets.
What is a Buske?
Busks were practical objects that existed to keep the female posture erect, to emphasize the fullness of the breasts and to keep the stomach flat.
What were stays boned with?
This week, I’m going back in history, and back to basics, to discuss the differences between stays, jumps & corsets. Stays, was the term used for the fully boned laces bodices worn under clothes from the late 16th or early 17th century, until the end of the 18th century.