What this is is stomping your foot down on the hi-hat pedal in a way that makes the hi-hat cymbals pinch together real quick and open up. It’s kinda like simulating crash cymbals in an orchestra would do, but doing it with the hi-hat. An open hi-hat foot splash works like this.
In this post
What is a hi-hat slurp?
The hi-hat slurp (or pea soup) is when you play the hi-hat and raise the top hat a bit before closing it on a downbeat or upbeat. For example, if the cymbal pattern is 8th notes, the slurp may start on the upbeat and your foot will come down on the pedal on the downbeat. Slurps can also be on the downbeat.
What is drums splash cymbal?
In a drum kit, splash cymbals are the smallest accent cymbals. Splash cymbals and china cymbals are the main types of effects cymbals. The most common sized splash has a diameter of 10″, followed by 8″. Most splash cymbals are in the size range of 6″ to 13″, but some splash cymbals are as small as 4″.
What does hi-hat stand for?
A hi-hat (hihat, high-hat, etc.) is a combination of two cymbals and a pedal, all mounted on a metal stand. It is a part of the standard drum kit used by drummers in many styles of music including rock, pop, jazz, and blues.
Where do you put a splash cymbal?
I like to mount my splash cymbals close to my hi hat or in a place that facilitates movement around the drum set. Out of the way of larger cymbals and drums is a good start, yet other considerations like microphone placement or the added weight when hauling gear are also important.
Who invented the hi hat cymbal?
During the late 1920s, the legendary “Papa” Jo Jones (pictured left below) began playing timekeeping patterns on what would be later known as the hihats. Some speculate that Barney Walberg, of the famous Walberg and Auge Drum Company, invented the earliest hihat stand in 1926.
What DB should hi-hats be?
If you absolutely must have a volume level for your hi hats, I would suggest -20 db. But this can vary depending on the artistic effect you’re going for as well as how high the average peak volume of your song is going to be.
Should I put reverb on hi-hats?
Adding some modulation or reverb to the white noise sample will improve high-end detail as well. Another trick to excite filtered hi-hats is to slap on some saturation or distortion.
Why does my hi-hat sound tinny?
To check: the top hi-hat cymbal needs to be fairly tight on its fixings. They can come loose, allowing too much movement. There is an adjustment for the angle of the lower cymbal underneath it, which works using a small screw. There needs to be some small angle so the two can make more gradual contact.
How do you notate a drum kit?
Drums are notated by dots, while cymbals are notated with an “x.” These symbols typically have “stems” attached to them, which help explain how to count the beat that is shown.
How open should a hi-hat be?
As well as this, the Hi-Hat cymbals only need to be set apart by about an inch when open at rest. The distinctive Hi-Hat bark occurs when the two cymbals vibrate against each other and so need to be in contact slightly when opened.
What is a sock cymbal?
sock cymbal (plural sock cymbals) A pair of cymbals that can be closed or opened by means of a mechanism, such as a pedal mechanism.
Should I get a splash cymbal?
You should get one, but check around because they are relatively inexpensive, you could get a higher quality one than the ZXT for very little more money.
Why are there holes in cymbals?
Cymbals with holes have less sustain and get out of the way very quickly. When you have a full set of cymbals, it’s often great to have one or two cymbals that have quick attacking sounds. They’re great for playing quick jabs. Cymbals with holes are the best way of achieving that sound.
How should cymbals be set up?
Your ride cymbal should be set up to your right, usually just over the floor tom. If you’re using one crash cymbal, set it up to the left of your kit somewhere between your snare drum and your mounted tom. If you’re using a second crash cymbal, you should place it between your mounted tom and your floor tom.
What is the difference between a crash and a ride cymbal?
Ride cymbals tend to be larger, and are used to keep the beat or to play a specific rhythmic pattern. They usually give off short, sharp sounds. A crash cymbal, on the other hand, is used mainly as an accent, producing a loud “crash” or a sustained swelling to add dynamics and expression to your song.