The Mule Knot (a.k.a releasable knot) is ideal to lock off the rope on the belay plate. There are many occasions in climbing when, belaying from the harness using a device which does not self-arrest (e.g. a belay plate), you may find it useful to lock the rope off.
In this post
What is a mule knot used for?
The Munter: The Munter Hitch Knot – (the Italian Hitch) shown as Frames 1 – 6 in the animation, allows controlled descent when rappelling (abseiling). The climbing rope passes through a locking carabiner, round the rope, and back through the carabiner.
What is Munter Mule overhand for?
The Munter Mule is used to secure a munter. It is also used to escape or lock a loaded line in place with the excess rope.
What is a girth hitch?
A girth hitch, also called the strap hitch, ring hitch, lanyard hitch, and bale sling knot, is a type of hitch knot used to attach a rope or webbing to a stationary bar or to another sling.
Can a figure 8 knot fail?
The offset figure-eight bend is a poor knot that has been implicated in the deaths of several rock climbers. The knot may capsize (invert) under load, as shown in the figure, and this can happen repeatedly. Each inversion reduces the lengths of the tails. Once the tails are used up completely, the knot comes undone.
What is HMS carabiner?
HMS Carabiner – Also referred to as pear-shaped carabiners, these are special oversized versions of the offset d-shape designed for belay use. Because of this design, they excel when used with a belay device or using a hitch to belay with.
What does it mean to escape a belay?
The belay escape is a technique whereby the belayer frees themselves from the responsibilities of belaying. This fundamental skill is necessary for many rescue situations. Situations when you may need to escape the belay include: – If your partner needs hauling through a crux while following.
What knot tightens as you pull?
Uses: The Arbor Knot is used to attach the fishing line to the “Arbor” or “Spool Center”. In fact the Arbor Knot is really based on a noose knot and, therefore, pulling tightens it.
What is a scaffold knot?
The Scaffold Knot makes a sturdy loop that slides like a noose to fit snugly around a bar, rail or other object. It may be protected against wear due to chafing by the insertion of a lining called a thimble, creating what sailors refer to as a “hard eye”.
What is a fireman’s belay?
A fireman belay is a simple and effective way to increase the safety of a rappeller. The belayer stands at the bottom of the rappel with the rope loosely in his hands. If the rappeller loses control and starts to fall, the belayer pulls down on the rope and halts the rappeller’s fall.
How do you rappel without ATC?
There are three primary methods for rappelling without a traditional belay device: Pursuing a single rope rappel with your partner, using only one belay device. Using a munter hitch, using only one locking carabiner and the climbing rope. Using a double carabiner brake rappel with four carabiners.