Jason recommends beginning with 1,000-grit sandpaper. Coarser paper works faster but you’ll eat up the time saved when it comes time to eliminate the sanding scratches. Finer paper, say 1,500, leaves finer sanding marks that are easier to remove but the job takes a lot longer.
In this post
Can you wet sand with 80 grit?
Waterproof sandpaper is usually a closed coat, silicon carbide. It’s available from most automotive paint and supply stores. Grits from 60 to 1000 are available, although you should only need 60 to 80 grit for initial abrasion, and 180 to 220 grit or maybe 320 for final sanding prior to priming or varnish.
What is 220 grit sandpaper normally used for?
sanding finish
180 – 220 Grit: Fine. 180 – 220 grit is primarily used for the sanding finish or to sand in-between coats. It is also great for distressing! There are instances where you can use 180 to 220-grit to rough up a piece in preparation for paint, but you do not typically use these grits until after your first coat.
Does wet sanding remove scratches?
You can tell if the scratch is just in the clear coat by wetting the scratch. If it disappears for a few seconds when it’s wet, that usually means it’s just in the very top layer. This type of scratch will be easily removed with a little bit of wet sanding and buffing.
Does 1500 grit remove orange peel?
After washing the car, removing badges, and taping up any remaining trim, the first step of the actual orange-peel-removal process is to sand with a grit appropriate fo the paint job. It could be between 800 and 2,000 grit, and in this case the guys use 1,500-grit discs to dry sand the texture of the paint.
Does wet sanding require special sandpaper?
You won’t want to use regular sandpaper sheets for wet sanding. The abrasive grit on regular sandpaper loads up with the material being sanded. This, plus the grains, will usually cause more scratches on the material. You’ll want to use sandpaper that’s made specifically for this method.
Does wet sanding remove clear coat?
Wet sanding is used to remove severe clear coat scratches. It is the most effective of the three techniques at flattening the clear coat, but it’s also the riskiest. What is this? Wet sanding is an aggressive process which cuts away the clear coat quickly.
What is 800 grit sandpaper used for?
800-1000 grit sandpaper is ultra fine. It’s used for final sanding and polishing of thick finishes.
What is 2500 grit sandpaper used for?
The 2500 grit sandpaper needs only to be soaked in water to use in wet sanding situations. The pad is designed to remove minor scratches out of your automobile. Includes: This versatile sandpaper is designed to work on wet sand final color or clear coats.
What is 7000 grit sandpaper used for?
7000 grit is ULTRA FINE. Ideal for metal polishing, automotive paint surface polishing, car headlight restoration, to have a super fine surface.
Is 220 grit too fine for stain?
Generally, if you’re using an oil or clear finish, you can stop sanding at 180 grit. Continue on to 220 grit if you’re using a stain or dye.
What is the advantage of wet sanding?
Wet sanding, which is sanding with the addition of water to act as a lubricant, is less abrasive than dry sanding, and results in a smoother finish. It’s best to wet-sand the final finish of a project. Dry sanding removes more material, and smooths rough material quickly.
What causes orange peel in clear coat?
What is the orange peel effect in paint? The name orange peel is given by the resemblance of the final paint finish to an orange peel. This problem is caused by the lack of stretching or levelling of the paint, resulting in a deformed surface and in an increased thickness of the final coat.
How many coats of clear coat do you need?
When it comes to applying the final clear coat, after having finished with the paint job, three to four clear coats are generally recommended. Whether the dings were caused by daily wear-and-tear or by a minor fender bender, it’s a good idea to have car insurance to cover your bases in case of more serious damage.
Why is my clear coat not glossy?
The likely cause is that the paint was applied too thin per coat or the nozzle was too far away. A coat thick enough to get a glossy sheen is seen but not too thick that runs develop is the proper technique.
Can I wet sand with dry sandpaper?
Alternatively, you can use wet sandpaper for wet sanding and dry sandpaper for dry sanding as well. Wet sanding necessitates finer grit sandpaper than dry sanding. So, instead of starting with 80 grit, which is typically used for dry sanding, start with 400 grit for wet sanding.
What is 2000 grit paper used for?
Wetordry Sandpaper can be used by hand or for machine sanding. Polish Clear Coat And Paint And Restore Shine – 2000 Grit Is Perfect For Polishing Light Paint Texture In Clear Coat And Removing Light Scratches In Clear Coat.
Does wet sanding damage paint?
Wet sanding can cause damage to the paint of the vehicle if not done correctly, so take your time as you progress through the process.
How long for clear coat to dry before wet sanding?
Clear coat should be allowed to harden for at least 24 hours before attempting to use a buffer. In most cases, you will be trying to remove “orange peel” when buffing a new paint job.
When should you wet sand a car?
Wet sanding can be used when your vehicle has a dull finish. It helps remove tiny scratches and imperfections in the clear coat that aren’t individually visible but can cause the original shine to lose its sparkle.
Can I clear coat over 600 grit?
600 grit is aggressive enough to sand it flat without doing any damage to the clear coat. Remember, it is plastic, so too coarse of sandpaper can get very difficult to remove scratches from. Everything must be flat with 600!!