Other Safety Footwear Symbols These symbols and their meanings are: A – Antistatic. AN – Ankle Protection. C – Conductive. CR – Cut Resistance Upper.
In this post
What do the letters mean on work boots?
I – Electricity insulating footwear. WR – Water Resistance. M – Metatarsal Protection. AN – Ankle Protection. CR – Cut Resistant Upper.
What is an at toe boot?
A steel-toe boot (also known as a safety boot, steel-capped boot, steel toecaps or safety shoe) is a durable boot or shoe that has a protective reinforcement in the toe which protects the foot from falling objects or compression.
What does PT mean on work boots?
Puncture resistant components must reduce the possibility of injury caused by sharp objects that can penetrate the bottom of the footwear. The puncture resistant component must be an integral and permanent part of the footwear.
What does SD mean on work boots?
Static Dissipating shoes
Static Dissipating shoes actually conduct static electricity through the linings and insole, cement, and outsole and into ground. Static Dissipating Safety Shoes and non-Safety Shoes have a “SD” clearly visible on the ASTM label sewn inside the safety shoes. (ASTM F2413-05 Sec. 7.1.
What does M and W mean in boot size?
W= Wide and M= Medium width.
What does B mean in cowboy boots?
Narrow
Men’s Cowboy Boots are typically sized in B, D and EE widths. B = Narrow. D = Medium/Average. EE = Wide.
Which is better composite toe or steel toe?
Composite toe boots are the better choice for outdoor weather since they are less affected by ambient temperature than steel toe boots. While they are up to safety standards, composite toe boots do not withstand the same level of impact as a steel toe boot.
Is safety toe the same as steel toe?
What is a safety toe? It’s almost the same thing as a steel toe. In fact, all steel toes belong in the category of safety toes.
What is better steel toe or aluminum toe?
The Pros: Alloy toes are 30-50% lighter than steel. It’s made a bit thinner, so you get some more room in the toe box. The Cons: These can run a bit more expensive in some circumstances, but they’re worth it for the comfort and safety level.
What is an EH rated boot?
HAIX® line of EH Rated Safety Boots are specially designed to protect you from electrical hazards. This special type of EH rated work boots provides a source of protection to the wearer who accidentally comes into contact with live electrical circuits.
What does EH mean in boot size?
EH rated safety boots have an Electrical Hazard (EH) rating on them, meaning they have been tested by the American Society for Testing and Materials (ASTM) for their protection against an electrical shock.
What are S3 safety boots?
Footwear in safety class S3 (and in class S1P) have oil and petrol resistant soles, and all of the shoes and boots are slip resistant, anti-static and breathable. In other words: total safety. Safety Shoe. Safety Boot.
What does SA mean on boots?
super-static dissipative footwear) For industrial work environments where a static discharge can create a hazard for workers or equipment. Warning: This footwear should not be used where contact with live electrical conductors can occur.
What is an ESD boot?
ESD (or ElectroStatic Discharge) safety shoes on the other hand, have an even lower electrical resistance between 0.1 and 100 (MΩ). The use of ESD safety shoes prevents a build-up of static electrical charges in the human body by sending these charges to the ground in a very safe and controlled manner.
Is ESD and EH the same?
Static Dissipative (ESD) and How to Care For ESD Footwear. Electrical Hazard boots and shoes are designed to significantly reduce the flow of electricity that goes through the shoes and ground, which will in turn minimize the possibility of getting electrocuted.
How do I know if my foot is medium or wide?
The width of your feet is the distance between the two widest parts of your foot. This is likely a single measurement in one area—at the base of your toes, called the ball width. This is the measurement between the big toe joint and the small toe joint.
What does D mean in shoes?
A ‘D’ width is the most common size for men and is considered a Normal/Medium/Standard width. For women, a ‘D’ width is considered Wide.
What does M9 W10 mean?
Shoe size
| Shoe size | ||
|---|---|---|
| M6/W8 | 38-39 | 5-6 |
| M7/W9 | 39-40 | 6-7 |
| M8/W10 | 41-42 | 7-8 |
| M9/W11 | 42-43 | 8-9 |
What does M mean in cowboy boots?
36-52. * D or M = Men’s normal or regular width. * EE, EW, W = Mens’s wide width. * EEE= Men’s Extra wide width. * B = Men’s narrow width.
What does W mean in cowboy boots?
The letters represent width.