Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.
In this post
How do you calculate backfill on a trench?
The volume of a rectangular cubed shape is found by the formula v = l x w x d, where v represents volume, l is the length of the trench, w is the width and d is the depth. Applying the numbers to this formula (8x 50x 6) the cubic footage of the example area is 2400 cubic feet.
How much drainage rock do I need?
You would need around 0.72 cubic feet of gravel per foot length of French drain for a typical French drain width of 10 inches and a depth of 12 inches if you’re using a 4″ drain pipe. On the other hand, you would need around 0.6 cubic feet of gravel if you’re using a 6″ drain pipe.
How do I calculate how much gravel I need for a ditch?
Determine the depth of the excavation. Let’s say it’s d = 2 yd . Multiply the area and depth of the excavation to obtain its volume in cubic yards: 18 * 2 = 36 yd³ . The volume of gravel required is equal to the volume of excavation.
How do you calculate cubic yards in a trench?
The formula: Number of Cubic Yards = Length (in feet) Width (in feet) Depth (in feet) ÷ 27. Simply multiply the three dimensions together to find the number of cubic feet, then divide by 27 to find the number of cubic yards.
How do you settle dirt in a trench?
Place the flat end of a hand tamper tool on top of the soil in the trench. Pick up the tamper and hit the surface of the soil with it using firm pressure to pack the soil down. Repeat the process over the length of the trench until all of the soil is compacted.
How much backfill do I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How do you calculate drainage stones?
Multiply the together the length, width, and depth measured in feet. Multiply by 27 to convert cubic feet into cubic yards. Multiply by 1.5 to calculate the weight of the crushed stone in tons.
How do you measure a drainage rock?
Measure the diameter of the drainage pipe. This is usually 4 inches. The volume of the pipe is expressed by the formula: volume = pi x (radius^2) x length of the pipe, where pi = 3.1415, and the radius is half the width of the pipe, expressed in feet.
What is the best gravel to use for drainage?
Crushed gravel is one of the best choices for drainage. Use #3 or #57 crushed stone for your drainage needs. Select an angular crushed gravel—smooth stones drain poorly. Gravel between 0.5 and 1.5 inches is the best choice for drainage.
How deep should you lay gravel?
The depth needed is dependent on the material chosen. Mulch and gravel under 1-1/2” in size will need to be 2-1/2” deep. Gravel 1-1/2” to 2” will need to be 3” deep, and 2” to 4” gravel needs to be 4” deep.
How much will a ton of gravel cover?
100 square feet
Understanding Size and Coverage
Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
How many tons is 4 cubic yards?
As per thumb rule, 1 cubic yard gravel = 1.4 tons, here we have 4 cubic yards of gravel, so 4 cubic yards of gravel in tons = 1.4 ×4 = 5.6 tons, so there are 5.6 tons in 4 cubic yards of gravel.
How many cubic yards is a pickup truck?
Full Size Pickup Truck
The bed of a full size standard pickup has dimensions of: 8′ long X 5.33′ wide X 1.5′ high. When loaded level full, a truck of this size will hold 2.5 cubic yards of material. The following chart outlines some additional common capacities of the full-sized pickup truck.
How much is a cubic yard of rock?
A cubic yard of rock equal as 3000 pounds, A short ton weighs around 2000 lbs, so number of tons, 3000/ 2000 = 1.5 short tons, in this regard, “how many tons in a cubic yard of rock”, so, generally there are 1.5 short tons of rocks in a cubic yard.
How many cubic yards does a dump truck hold?
Dump Truck Cubic Yardage – The Basics
While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.
What do you backfill trench with?
Backfill in layers of 4 to 6 inches, using non-organic fill material that is free of debris. Compact with a 1,000-pound compactor, or as appropriate. Water thoroughly.
How long does it take to trench 100 feet?
The short answer is a good working trencher of 100 linear feet will take roughly 12 hours to dig. You can calculate the work period by multiplying the linear feet you need to dig by 0.12. However, how fast you finish depends largely on the trencher power and the soil environment.
How long does it take for trenches to settle?
If left dry, clay and silt will settle rather quickly, i.e., 1-2 years. If they come in contact with water, they can settle in just a few months. However, we don’t recommend using these soils around your foundation for structures or your lawn.
How do you calculate backfill gravel?
Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.
How is backfill stone calculated?
Multiply the length of the wall by the desired height, then divide this number by 81 to determine the amount of backfill gravel needed. Add the backfill amount to the base amount to determine the total cubic yards of gravel necessary for completing the wall.