Place the watch in the holder or on the foam with the arrows are facing downwards. Using the hammer, lightly tap the end of the push-pin tool over the cotter pins until you can no longer push the pin inside the link. When the pin pops through, remove it using your fingers or a small set of pliers.
In this post
How do you get a watch off your wrist?
Place your watch into the holder or foam piece so that you can see the top of the pin. Use the pushpin tool and the hammer to gently tap the pin until it emerges from the other side. Use your fingers or a small set of pliers to remove the pin gently. Repeat until you’ve removed all your planned links.
What can I use instead of a spring bar tool?
Using a spring bar tool is one of the most effective ways to remove or replace your watch band but if you don’t have one, worry not. We’ve got you covered. We’ll show you how to use three alternatives which are a flat-head screwdriver, dental floss, and a razor blade.
What is a buckle clasp on a watch?
Deployment clasp / deployment buckle. A watch band buckle or a watch band clasp is either the opening part or the widening part of a watch strap. Its main purpose is to connect and secure two strap ends around your wrist and, usually, to make opening and fastening quick and easy.
How does a watch clasp work?
The way it works is pretty straightforward: it is a simple system of small, curved metal plates and hinges, which allow the layers to fold over each other. The system is pressure-sensitive, which, once activated, locks the two sheets in place together, ensuring correct closure.
What is a butterfly watch clasp?
Butterfly Clasp. A clasp generally enhances the appearance of a watch strap and makes opening and fastening the strap very easy. A butterfly clasp consists of two metal hinges that open to the right and left – just like a butterfly spreading its wings. Some butterfly clasps are available with push button release.
How do you remove a Rolex bracelet without the tool?
Alternatively, if you don’t have a spring bar tool, you can use a pushpin, a paperclip or even a few sturdy wooden toothpicks. Any of these will work. A soft cloth to lay your Rolex on while you’re working on it.
How tight should a watch be?
The watch should be loose enough that you can slide your index finger underneath the band but not so loose that you can move the index finger around. If you cannot slide your finger underneath the band, the watch is too snug.
How do you get the back off a stubborn watch?
If the hinge is tight or your thumbnail is too short to pry off the backing, a flat razor blade can work as well. Place the razor blade’s edge in through the hinge opening and lift until it is pried off. If there is no indentation but a space between the back and casing, you can use this method with a razor blade.
What tool is used to open the back of a watch?
A case wrench will use fitted small pins to fit tightly to the back and unscrew the case back and the using a watch case holder can help hold the watch safely while you turn the tool. Other watch tools like the crystal or case press will press on friction watch backs and fit watch crystals in the same way.
Do I need a spring bar tool?
A watch’s strap or bracelet is almost always held in place by two small steel spring-loaded bars that fit between the lugs, and while removing them doesn’t necessarily require a dedicated tool, using one certainly makes the operation easier.
What is a watch spring bar tool?
Spring bar tools are designed to make the exchanging of watch straps on watches an easier task. The fork end of the spring bar tool is normally used for removing the watch strap.
Can you change a watch band yourself?
Changing a watch strap is the solution to a replacing broken strap and can change the look of a watch. It is easily done at home with the proper tools and a steady hand. It involves setting up a work space, removing the old strap, installing the replacement strap, and removing any smudges or dirt from the watch.
How do you remove a watch band pin?
Use the pin pusher or spring bar removal tool to push the pin that secures that particular link, following the direction of the printed arrows on the underside of the metal link. You should be able to push the pin 2 or 3mm and then pull it out from the other side using your pair of pliers or by hand.
What is a pin buckle?
The tang buckle, also known as the pin or ardillon buckle
The Tang/Pin/Ardillon buckle looks very much like a traditional belt buckle. The tail end of the strap is threaded through the loop of the buckle, and held in place by the pin (or tang) poking through a hole and resting in a recess in the loop.