Place a safety pin on one edge of the elastic. Insert elastic into the opening of the waistband casing, and slip elastic through the waistband, making sure not to twist the elastic as you pull it through. While pulling the elastic through, make sure the other end of the elastic does not get pulled into the casing.
In this post
How do you attach an elastic waistband to a skirt?
Fold the elastic over to the front and zigzag stitch it along the bottom. At this point, most of the elastic band will be behind the fabric waistline. Fold it up and over the waist so it’s resting on the right side of your skirt. Then, stretch it and zigzag stitch it in place.
How do you put in an elastic waistband?
Instructions
- Cut Your Elastic to Fit. Following the instructions for your pattern, cut your elastic to fit the part of the body it’s going around.
- Pin the Ends Together.
- Join the Ends.
- Form a Square of Stitches.
- Divide the Elastic.
- Divide the Waistband Fabric.
- Apply the Band to the Fabric.
- Stitch.
How do I stop my elastic waistband from rolling?
After you have sewn the waistband casing, but before you feed in the elastic, add an extra row of stitching very close to the edge of the fold. Mine usually ends up about 1/16″ from the edge. The edge stitching gives a lovely finish to the waistband, as well as stopping the elastic from twisting.
How much elastic do you need for a skirt waistband?
Measure your natural waist (smallest part of your waist). Now subtract about 2-3″ from that measurement. Waist measurement – 2″ = elastic length. Attach a safety pin to one end of the elastic.
What do you do if your skirt is too loose?
- Fold the skirt and match up the side seams to locate the back center of the skirt.
- Turn the skirt inside out and slip it on.
- Grasp the waist and pull out the extra material until the skirt is tight.
- Hold the skirt tight and sit down.
- Sew a straight stitch into the waist beside the safety pin.
Can elastic be ironed?
Iron the elastic.
With the damp cloth on top of your elastic band and your iron on the highest setting, iron over it. Iron for 10 seconds and then let sit for 10 seconds. Continue doing so for 5-10 minutes. This will help your pants fit because as the elastic heats, it will heightens the breaking weight.
What stitch is best for elastic?
Use the zigzag stitch setting on your sewing machine and sew across the overlapping elastic 2 or 3 times. This will ensure that the ends of the elastic band are well connected. Another option is to sew the ends of the elastic together using a scrap piece of fabric.
Can you sew elastic with a straight stitch?
You can use a zig-zag stitch or a straight stitch. If you are sewing this elastic waistband on a stretch garment then a zig-zag or twin needle is your best option.
How do you calculate how much elastic to use?
Unwrap a length of your elastic and mark a length of elastic based on your measurement. Then, cut the adjusted measurement. For example, if your waist measurement was 30 inches (76 cm), subtract 2 inches (5.1 cm) to get an elastic measurement of 28 inches (71 cm).
What elastic is best for skirts?
Woven elastic is firm when stretched and unlike braided elastic, does not narrow when stretched. It is great to use in skirts and pants waistbands as it doesn’t overstretch and lose its shape. Woven elastic often comes in wider widths for a variety of uses and can be referred to as non-roll elastic.
How wide should a skirt waistband be?
As the waistband sits on top of the skirt (above where you measured your waist to make your block), it is not usually much wider than this as it won’t fit how the body curves outwards again above the waist. The length of the waistband is the (measurement of the skirt waist ÷ 2), plus 0.75-in for the extensions.
How much should elastic stretch?
between 3-8%
Using Math: Generally, elastic is stretched between 3-8%, with 8% being used only in parts where you want the garment to “hug” the body (i.e. at the underarm near the armpit). So if you want to use math, then you can measure the length of what is being sewn and reduce it by 5%.
How can I make my waist smaller?
All you have to do is put on your pants and pinch a fold of loose material at each side of the waist. Fold the extra fabric down flat toward the back of the waistband. Hold the fold in place with a small binder clip! It will not look great, but it will do the job!
What do you do if your pants are too big around your waist?
The best temporary way to tighten pants without a belt is to use a safety pin, shoelace, or suspenders. The simplest permanent way to tighten pants without a belt is to take in the side seams or pay a tailor to alter the waist. Shrinking the pants will also permanently resize the waist.