An easy way to determine belt size is to simply “add 2″ to your off-the-rack trouser size. For example, if you wear a 36” waist trouser, then a 38 belt size will be a safe bet. Most will find this simple formula works best for pants worn at a traditional height–close to the natural waistline.
In this post
What size belt do I need for a 34 waist?
size 36 belt
The general rule for measuring a man’s belt size is to take your pant size and add 2 inches. For example, if you wear a size 34 pant, we recommend a size 36 belt. You can also use a tape measure where you will be wearing your belt, that number is where the center hole of the belt will fit.
What size belt do I need for a 32 waist?
A useful guideline, although not as accurate as measuring, is to order one size up from your Jeans or Trouser Size: if you wear 32” jeans/ trousers then it is likely a 34” belt will fit.
Can a belt be made smaller?
Placing the belt on a sturdy work surface, use a screwdriver to unwind the screw and unhook the buckle. If you need to shorten the belt by three centimetres, for example, measure down from the buckle-end of the belt and draw a straight line with the pencil. Cut along the line with scissors, reserving the trimmed part.
Will a 36 belt fit a 32 waist?
But as a general rule of thumb, in MOST cases the belt will need to be 3″ to 6″ greater than your pants waist size, depending on whether you plan to wear a holster, what kind of holster, and the size of the holster.
How to Determine What Size Belt to Order.
| Pants Size | Belt Size OWB | Belt Size IWB |
|---|---|---|
| 30 | 34 | 35 or 36 |
| 31 | 35 | 36 or 37 |
| 32 | 36 | 37 or 38 |
| 33 | 37 | 38 or 39 |
Can a 38 belt fit a 34 waist?
If your pants size is 32, buy a belt size 34. If your pants size is a 34, buy a belt size 36; if your pants size is a 36, but a belt size 38, etc. The reason you buy a belt size up from your pants size is to give yourself a few inches of room in case your body size ever changes.
How do I determine my belt size?
Lay the belt on a clean, flat surface. Start the tape measure at the hole you use and measure to the end of the belt, where it meets the buckle. Belts are measured in inches and you should round to the nearest inch. If you measure 36 inches, you will want to purchase a size 36 belt.
Do you buy a belt the same size as your waist?
Again, your belt size is not the same as your waist size or even your jeans/pants size. As a general rule, belt size is measured from where the end of the belt meets the belt buckle to the middle hole of the (most often five) pre-punctured holes in the belt.
What size belt should I buy for a 31 waist?
Your belt size is two inches larger than your pant waist size. If you wear a 34″ trouser, buy a 36″ belt.
What size is a 32 inch belt?
MEN’S BELT SIZING
| BELT SIZE IN INCHES | BELT SIZE IN CM | MEN SIZES |
|---|---|---|
| 32 | 82 | XS |
| 34 | 87 | S |
| 36 | 92 | M |
| 38 | 97 | M |
Does tying a belt around your waist make it smaller?
People feel that wearing slimming belt melts fat from the waistline area. But as we all know, this is not possible because there is no scientific evidence to support the claim of spot reduction (losing fat from one body part). Our body burns the stored fat in an overall proportion.
How do you tighten a leather belt?
If you have a leather item that you need to shrink, the easiest approach is to soak the leather in water, then dry the item in the sun or with a hairdryer. The combination of moisture and heat will tighten up the fibers of the leather, causing it to shrink somewhat.
Can a cobbler shorten a belt?
Our expert cobblers can shorten and lengthen your favorite belts to ensure they fit your waistline like a glove. No matter what fix you need to make, we’ll work closely with you to determine which measurements make sense for your belt lengthening or shortening repair.
How do you cut an adjustable belt?
DIY: How To Adjust the Cut Adjustable Classic Belt
- STEP 1: Flip belt onto the back side and pull back the lever. (
- STEP 2: Release the belt from the buckle by sliding it out. (
- STEP 3: Cut the belt to your preference.
- STEP 4: Now insert the belt back into the buckle by sliding it in.
What size belt do I need for a 38 inch waist?
Using Your Pants Size
Find a pair of pants that fit you well and have a numerical, waist-based size, such as 26 inches or 38 inches. Add two inches to this waist size to find the appropriate belt size.
How long should a size 36 belt be?
4. In general, we find that the proper size belt tends to be 4 inches longer than a man’s pant size. For example, if your husband wears size 32 pants, a 36″ belt will likely fit.
How long is a 36 belt?
Men’s Belt Sizes
| Numerical Belt Size | 30 | 36 |
|---|---|---|
| Belt Size | XS | M |
| Waist in inches | 26½-28 | 32½-34 |
| *Length in inches | 28-30 | 35-36 |
Which hole should my belt fit?
Therefore, the middle belt hole (or third hole, since most belts have five holes) is the ideal belt hole to use.
How many inches is a size 34 belt?
You can choose a 34 belt, which fits in the medium category, which usually spans 32 to 42 inches. Small sizes measure between 26 to 30 inches, while large sizes are around 46 to 50 inches. Belts for men who wear a 34 measure 34 inches from the far end (all fashion rights reserved).
How long should your belt be?
Your belt size should be 1-2 inches longer than the size of your pants waist. So if you take a 40 in pants, you want a 41-42 inch belt.
What is normal belt width?
1 1/2 inches wide
For men, our most common belt configuration is a 1 1/4 inch belt tapered to 1 inch (1 1/4” x 1”) with a 1 inch buckle set. Most men prefer a wider belt, 1 1/4 inch or 1 1/2 inch. Both widths work fine with jeans or khakis. However, a 1 1/2 inch belt is too wide for most dress pants.