Minimum space is 40 inches deep and 32 inches wide for a washer and dryer. A side-by-side washer and dryer needs at least 40 and 56 inches of space.
In this post
How deep does a closet have to be to fit a washer and dryer?
To fit the appliances in your available space, make sure to account for a laundry area that is roughly 29 inches wide, 80 inches tall and 32 to 34 inches deep to accommodate both the washer and dryer.
What is the standard depth for a laundry closet?
The Laundry Closet (2 Unit) layout has a typical width of 5′ (1.52 m) and depth of 36” (91 cm) for an overall area of 15 ft2 (1.39 m2). When stacked, a counter height of 36” (91 cm) is common, while a counter height of 42” (107 cm) is used when units are side-by-side.
Can a washer and dryer be in a closet?
Yes, a stackable washer and dryer can fit in a closet. These appliances will take up at least 2×2 feet of space on the floor. However, there must be sufficient space on the sides and the back for electrical, water, and ventilation hose connections.
What is the minimum depth for a laundry room?
Washer depths range from 25 to 28 inches deep, and dryers range from 25 to 32 inches deep. Your laundry room will need to be at least 5-foot wide to accommodate both a washer and a dryer. To comfortably load a washer and dryer, you should have at least 3-foot of space in front of them.
How deep does a closet need to be for a stackable washer dryer?
40 inches deep
The space for stackable washer and dryers and laundry centers needs to be at least 40 inches deep. Since many models run around 30 or more inches in depth, having an extra five to 10 inches of space behind the units should be more than enough to accommodate any hoses or plugs.
How do you enclose a washer and dryer?
You should leave at least 1 inch of space between the appliances and the cabinets or walls and at least 4 inches of space between the back of the washer and dryer and the rear wall. Enclose the appliances with a curtain attached to the underside of the countertop or use cabinet doors to hide them when not in use.
How do you install a washer dryer hookup in a closet?
If you have a stacked washer and dryer, place them against the wall on the side of the closet nearest to the hot- and cold-water connections. Avoid placing the unit in the center of the closet, as you will lose potential storage space.
How much does it cost to build a laundry closet?
A laundry closet means you’ll be working with only a small amount of space. But it comes with a smaller price tag as you won’t need to spend money on items like flooring, walls, and sinks. On average, you’re looking at paying between $4,500 to $8,000, depending on if you need new appliances and hookups.
How big should a washer and dryer closet be?
All washer and dryer pairs vary in size, but the standard dimensions for pairs placed side by side are about 27 inches in width and around 35–43 inches in height. So, your designated laundry room needs at least a 54-inch space at the very minimum.
Where do you put a washer and dryer in a small house?
Good locations include inside the kitchen or bathroom or directly next to one of those rooms. It will also be easier to route plumbing this way. Buildings usually stack the wet zones in a vertical line. Putting a washer and dryer in your bedroom closet wouldn’t be permitted even if there’s room for one.
What is the downside to a stackable washer and dryer?
Con: Less Loading Capabilities
As previously mentioned, your stackable washer and dryer will have less room inside of them for each load of laundry. That limited room is a double-edged sword: it’s good for saving on your energy bill but bad for the amount of laundry you can do.
How much space do you need between washer dryer and countertop?
Washers and dryers placed side by side typically require a horizontal space of 60 inches or five feet. Measure the depth of the appliances (most are around 33 inches) and add six inches for hoses and venting. Allow one inch on each side and between appliances to reduce noise from vibrations.
What size closet do I need for a stackable washer and dryer?
For a stackable washer and dryer, provide a minimum space of 40 inches deep and 32 inches wide. A side-by-side washer and dryer need space measuring at least 40 inches deep and 56 inches wide.
Does a washer dryer need a vent?
Most washer dryer combos are ventless and are designed with drying systems that work differently from the ordinary stand-alone (vented) dryer. Instead of venting moist hot air to the outside, like a conventional dryer would, the combo unit makes use of condensation similarly to condenser dryers.
How much does it cost to add a washer and dryer hookup?
between $350 and $600
The price to put in washer and dryer hookups averages between $350 and $600 if they’re placed in an ideal location. If the appliances end up in a spot that’s further from your existing plumbing, you could end up paying anywhere from $700 to $2,000 or more. Washers take a standard 120V outlet.
How hard is it to install washer and dryer hookups?
To install a washer and dryer, you need plumbing knowledge, some electrical know-how and a few carpentry skills. The washing machine needs an electrical outlet, a supply of hot and cold water and a drain. The dryer also needs electricity, but if it’s an electric dryer, you must install a 240-volt outlet.
Does a laundry room add value to a home?
Something as simple as updated laundry room floor cabinets can take the space from boring to elegant. A frequently asked question many homeowners have is, “Can I add monetary value to my home by remodeling my laundry room?” Our relatively straightforward answer is “not much”—at least in terms of resale value.
How much does it cost to install plumbing for a washing machine?
Hiring a Plumber
Plumbers usually charge around $700 to $2,000 to install a washer and dryer hookup. If it’s a relatively straightforward hookup that you’re installing near your existing plumbing, then your costs should fall at the lower end of that range.
How much does it cost to make a small laundry room?
A small laundry room addition typically costs about $2,000, and with lower costs, upgrades should start with the necessities. Work in this small space is largely centered around adding basic storage and maybe even a short span of countertops.
Can you put a washer and dryer anywhere in a house?
Although you theoretically could place it anywhere in your home, it still must be in an area with the required utility hookups and ventilation capabilities. An electric unit needs a 240-volt electrical supply, while a gas unit needs the same gas hookups as full-size freestanding machines.