The size is usually 12” to 14″ wide to make sure people can read it from across the crowd. If your design is just a word, don’t worry about specifying Upper Back– we’ll know, and position it accordingly, around 4″ down from the collar.
In this post
How big should back of shirt decals be?
On a large shirt for adults, the recommended design size is 11×11 inches. Give or take 0.5 to 1-inch. For extra-large shirts, the same size is recommended at 11×11 inches. For an extra-large adult shirt, the recommended decal size is 12×12 inches.
What size should lettering be on a shirt?
In general- adult sized shirt designs should be between 11 and 14 inches. For kids sized shirts, you only need between 5.5 and 9 inches. Of course, the design size can change depending on what you’re making, but these are good sizes to start with.
How do you put a name on the back of a shirt?
Designs placed on the back of shirts should be approximately 5” from the collar and centered between the left and right seams. This option for logo placement is best for maximum exposure. Due to this part of the shirt, it has the largest real estate for your brand’s design.
How far down should a design be on a shirt?
2” to 3.5”
Use a tape measure and measure 2” to 3.5” down from the collar on the front or back of the shirt. The idea is for the design to be printed on the intersection of the center line of the tee and the chest line. This will give you perfect placement on your custom shirts every time!
What size should a screen print be on a shirt?
If printing on adult size shirts, the standard size is 11” x 11” (or 11” wide by proportionate height). This will look good on almost any adult size. For printing on youth sizes, a good design size is about 9” x 9”.
How big should an image be to print on a shirt?
The standard printing area men’s or unisex t-shirts is 12×16”, except for men’s XS, which is 10×12”. The standard printing area for women’s t-shirts is 10×12”, except for women’s XL and larger, which is 12×16”.
How much vinyl do I need for shirts?
If you are using vinyl sheets 12×24 inches, you require approximately 3-4 sheets of vinyl for twenty shirts. You may prefer using the rolls instead of sheets, in which case you will require 1-2 rolls of vinyl.
How do you know where to put vinyl on a shirt?
For adults, measure down 3″ from the neckline along that vertical crease and that’s where the top of the decal should begin. For kids, which is what I was working on in this example, I start a little higher, usually at about 2″ below the neckline.
What’s a good size for a logo on a shirt?
If you want a nice, big graphic, 11 to 13 inches is typically the size of what you’ll print on the shirt, depending on the size of your shirt. The longest side of a sheet of paper is 11 inches long, giving you a nice visual representation of how large your graphic may look on a shirt.
How big should a decal be on a 2XL shirt?
11" x 11″
A good size for adult 2XL & larger shirts is 11″ x 11″ (up to 12″ – 13″.)
Do you need to prewash shirts before applying vinyl?
Additionally, a pre-wash is not always necessary either. If you prefer to wash your blanks, make sure to steer clear of liquid fabric softeners which leave behind a HTV repelling residue.
Can you use permanent vinyl on shirts?
Is Heat Transfer Vinyl Permanent? HTV, when applied to shirts or fabrics, can be permanent and can last for a long time. Though, HTV cannot be used for materials that will be exposed to outside elements. It is best to use permanent vinyl for materials that will be used outdoors.