Bias tape is perfect for a decorative finish on a curved edge because the bias will bend and ease around the curve. A straight-grain strip will not curve without kinks and warping. Bias is used in many quilting techniques and sewing projects.
In this post
When should you use bias tape?
Bias tape, made from strips of bias-cut fabric, is most commonly used to finish garment edges, especially along necklines and armholes. One reason why is that bias tape’s inherent flexibility enables it to be sewn neatly around curves for a smooth, pucker-free look.
Do people still use bias tape?
December 30, 2020 By Rochelle New. Bias tape, whether you make it yourself or nab a ready-made version at the store, is commonly used to bind quilts. It can even be used to create modern quilt designs all on its own. But here’s the thing: these strips of bias-cut fabric can be used in so.
Is bias binding necessary?
Bias binding is a must for quilts with curved or scalloped edges. It will stretch around the arcs but will remain flat along the edges. But it can also be used for straight edge quilts. A striped fabric cut on the bias creates wonderful contrast and a little pizzazz.
What is the difference between bias tape and binding?
This is because while bias facing turns the seam allowance inward, bias binding simply wraps around the raw edge. Left untrimmed, your neckline will be slightly smaller than intended. Sometimes, this is okay – The Cabin pattern has a 1/4″ seam for both facing & binding, but the difference is minimal.
Should you wash bias tape before sewing?
Typically ready-made bias binding is made from poly-cotton and has a sort of startchy coating on it to make it a little stiff. This will soften once its on your garment and has been washed (but you don’t need to pre-wash it). It can come single folded or double folded.
Can you use ribbon instead of bias binding?
Using commercially available ribbon is an alternative to using bias tape or manually cut straight- or bias-cut binding strips. More importantly, it can be more convenient to use as it is pre-cut and unrolls from a spool. Ribbon also adds a distinctive contrast depending on the project.
What is the advantage of bias binding?
Bias Binding
Creates a sturdier edge because it puts the fold on the cross-section of the woven threads instead of lining up the fold with the grain of the fabric.
Can I make bias tape not on the bias?
You can also make single and double fold tape without a bias tape maker by simply folding and pressing it by hand. Be extra cautious not to put your fingers too close to your iron! For the double fold bias tape, we’re using a 25mm bias tape maker.
What fabric is best for bias tape?
The best fabrics for making bias tape
Lightweight silks, cotton batiste, cotton voiles, cotton quilting fabrics, shirtings, cotton chambrays all make excellent bias. But you can be a little adventurous as long as the fabric is lightweight.
Why do they call it bias tape?
Now that you and binding are getting along, it’s time to meet basic binding’s quirky cousin: Bias Binding. Bias binding gets its name from the way the binding cloth is cut. There are three ways to cut your fabric: Lengthwise (also known as Warp) – runs parallel to the selvage and has little to no stretch.
Can I use double fold bias tape instead of single fold?
Double Fold can be used for hems and necklines like the Single Fold……. it just depends on if you want to see the bias tape from the front of your project or not. But using a contrasting color of Bias Tape can really make a project POP! Like the Bias Tape I used to finish off the edge of these Gauze Swaddle Blankets.
How do you finish arm holes in sewing?
The two most common techniques used for finishing armhole edges are shaped facings and binding. Facings provide a dressier, more tailored finish. They work well with medium-to-heavy fabrics and garments that have more structure.
How wide should bias binding be?
You need to measure the width of where the binding is to go and multiply by 4. So, if you want the finished edge to be 1cm (1/2 inch) the width of your bias cut will be 4cms or 1½ inches. Work out the length you require and cut bias strips to that length.
Can you make your own bias binding?
You can buy ready-made bias binding relatively easily. But it’s good to know how to make it yourself so you can make it in a print, colour and width of your choice. Homemade binding is one of those details that can make your handmade clothes truly special. It’s also a great fabric stash buster!
How much bias tape do I need?
Measure the edge(s) of your project that will be bound. For example, if you plan to sew bias binding around a quilt that measures 36″ x 36″, you can simply use a tape measure to measure each side. Or, in this case, you can simply multiply 36″ x 4, which equals 144″. You’ll need at least 144” of bias binding.
What is bias tape used for in sewing?
Bias tape is used in making piping, binding seams, finishing raw edges, and is also used decoratively. It is often used on the edges of quilts, placemats, and bibs, around armhole and neckline edges instead of a facing, and as a simple strap or tie for casual bags or clothing.
How wide do you cut fabric for bias tape maker?
How wide to cut fabric for a bias tape maker? Usually, strips should be twice as wide as the size of the finished tape. On these tape makers, you can see some numbers. I have ½-inch and 25 mm tape makers – that’s the width of the final strips.
Is bias binding stronger?
Some quilters reason that bias double fold (also called French-fold) binding is stronger because there is more thread coverage at the outside edge of the binding. Binding cut on the straight of grain has only one long thread on the edge and is weak.