It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end. Bob Vila recommends single rods be placed around 66 inches.
In this post
Do closet rods need to be in studs?
The key to proper closet rod installation is using wall studs when possible to support your brackets. This ensures that the load of the closet rod isn’t on the drywall but is instead on solid wood. To securely install a closet rod in drywall: Measure the size of the space where the closet rod will go.
Do closet rods need center support?
You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.
How much weight can a wood closet rod hold?
Wood closet rod can hold an average weight of 4 pounds without support. With support, the wood closet rod can hold up to 170 pounds.
How do you hang a shelf in a closet without studs?
Fortunately, there are several different options you can use to support a shelf. The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
How do you attach wood to drywall without studs?
If you are securing wood to drywall where no studs are backing the wall, or you don’t want to mar the appearance of your wood with screws, use a high-strength construction adhesive. Construction adhesive will bond the wood permanently to the drywall.
What is the standard height for closet rod?
For a single-rod system, mount the rod 66 inches above the floor. This closet rod height enables long coats, skirts, pants, dresses, and suits to hang mid-air without folding or brushing against the closet floor.
How long can a clothes rail be without support?
1.8mtrs or 6ft is quite a span without a centre support. It all depends on the weight of the stuff you intend to hang on the rail.
How do you support a closet bar?
Shift items to another closet entirely. Unpack hanging closet storage racks and multiple garment hangers, and hang each item individually. This distributes the weight more evenly across the closet rod. Or at the very least, hang heavy storage rocks near the ends of the rod where it’s less likely to sag.
How long can closet shelves be without support?
You can divide up a closet into about anything you can draw on paper, just don’t span shelves longer than about 4 feet without support between.
How much space should be between shelf and closet rod?
If you are taller than average, opt to hang the closet rod a few inches above this mark. You’ll have more room to hang longer pants and coats beneath the rod. Allow about 24 inches of space behind the rod to hang garments and 4 inches above the rod before you add shelving, which allows for easy hanging of clothes.
Is a wood or metal closet rod better?
All closet rods for custom closet organizers are made of sturdy metal rather than wood or wire that is coated in various finishes. The higher quality metal rods hold a lot of weight and won’t sag.
How much weight can wooden dowel support?
Your 1″ dowel would be approximately 1/3 the strength of the 1.5″ dowels. Their weakest dowel had a safe load of 3,200# with an ultimate failure load of 5,000 – 6,000#. Therefore your safe load will probably be more than 1,000# and almost twice that before it would actually fail.
How much weight can drywall hold without a stud?
How much weight can drywall hold without a stud? Typically around 20 pounds. For heavy items, you may need to double up or hang from a stud. With a cheap plastic wall anchor, like the ones most products include in the box, drywall can hold about 20 pounds.
Can you hang shelves on drywall?
Drywall — especially the commonly used 1/2-inch-thick size — supports heavy weights when the shelving is properly installed. You can install heavy shelves with confidence that they will remain stable and secure, by using brackets.
Do shelf brackets need to be in studs?
As a general rule, it’s always ideal to install shelf brackets into wall studs.
How do you tell if you’re drilling into a stud?
Make a fist and knock on the wall with your knuckles. In some places, you’ll hear a hollow sound. Other areas will sound more “solid.” The “solid” sound indicates you have knocked on a stud. Studs are located about 16 to 24-inches apart.
How much weight can you hang on drywall?
Hangers and Nails Can Hold the Weight on Drywall
They can hold up to 20 pounds with the proper nail, such as a regular diploma frame. Flat mounted hook and anchor can hold up to 50 pounds.
How much weight can wall stud hold?
A screw in a stud can hold between 80 and 100 pounds. Be sure to distribute the weight across as many as you can.
Can I hang something without a stud?
In most situations you can use a hollow-wall anchor, which is designed to attach to the wall in the hollow spaces between the studs. Hollow-wall anchors come in a wide range of sizes and styles for use on virtually any wall, including drywall, plaster, and even hollow concrete block.
How heavy before you need a stud?
For pictures that weigh between 5 and 20 pounds, a good option is plastic drywall anchors and for pictures between 20 and 50 pounds, you can use a metal wall anchor or make sure to use a wall stud. For anything heavier, or a good all around solution for hanging multiple pictures, use a rail cable hanging kit.