Size Guide : How do I find the frame size of my Ray-Ban glasses ?
- The width or diameter of the lens is the first number (52-18-140)
- The bridge width is the distance between the two lenses (52-18-140) Bridge.
- The 3rd number of the sequence is the length of the temples (52-18-140) Temple.
In this post
What size is 51 in Ray-Ban?
Clubmaster Size Comparison Chart
| Frame & Clubmaster Size | SportRx Frame Width | Lens Width |
|---|---|---|
| RB3016 Clubmaster 49 Eyesize | 133 | 49 |
| RB3016 Clubmaster 51 Eyesize | 137 | 51 |
| RB3016F Clubmaster 55 Eyesize | 143 | 55 |
| RB4175 Clubmaster Oversized | 138 | 57 |
What is the standard Ray-Ban Justin size?
54mm
All Justin sunglasses are classified RB4165 and should have the word ‘JUSTIN’ on one of the arms. There is a 51mm and a 54mm size in the regular (No F) version.
How do I read my Ray-Ban number?
The number is for one of five categories from 0 to 4. 0 is for cloudy conditions; 1 is for partly sunny; 2 is for medium brightness; 3 for high intensity and 4 is for exceptional brightness. The following letter can be one of three — N for normal or non-polarised, P for polarised and F for photo-chromatic.
How do I know my sunglasses size?
You can easily found the size of frame by looking on the inside of your eyeglass temples (arm pieces). Below you’ll find a quick guide to helping you identify your eyeglasses. This is the only information you need when ordering your eyeglass or sunglass frames.
How can you tell if they are real Ray-Bans?
Original Ray-Ban sunglasses will have “RB” or “Ray Ban etched onto the corner of the left lens to prove its authenticity. If the etching is missing, or a low quality or painted on the glasses will be fake. Other signs to spot a fake pair of Ray-Bans include the packaging and way in which they are boxed to ship.
What do the Ray-Ban sizes mean?
The first one is the Model name, then the Lens width and Bridge width. There is usally a third number which represents the Temple Length, which is the measurement in millimeters of the ‘arms’ of the frame. Sometimes there is also a fourth number which is the Lens Height. Each of these numbers is measured in mm.
What do numbers on Ray-Ban sunglasses mean?
Size Numbers for the Frame and the Lenses
The first number represents the width of the lens in millimeters while the second number represents the distance between the two lenses. This is true for all glasses have two separate lenses at Rayban.
Can you look up Ray-Ban serial number?
4. Look For the Model Number. One of the most reliable methods for spotting genuine Ray-Bans is to look for the serial number. This can be found on the inside of the left arm of the sunglasses, unless they’re aviators, in which case the arms are too thin to fit a number.
What does 55mm mean on sunglasses?
Temple length
| Fit | Eyeglasses | Sunglasses |
|---|---|---|
| Small | 50mm and below | 55mm and below |
| Medium | 51mm–54mm | 56mm–64mm |
| Large | 55mm and above | 65mm and above |
What size frames for my face?
Glasses size guide
| Face size (temple to temple measurement) | Lens width | Arm length |
|---|---|---|
| Narrow (less than 129mm) | 50mm and under | 135mm-140mm |
| Medium (130mm-139mm) | 51mm-55mm | 140mm-145mm |
| Wide (over 139mm) | 56mm and above | 150mm or above |
How do you determine your frame size?
You can measure your frame dimensions with a millimeter ruler or cloth measuring tape.
- THE FRAME WIDTH. Measure horizontally across the entire front of the frame.
- THE LENS HEIGHT. Measure the lens vertically, at its tallest point.
- THE BRIDGE.
- THE TEMPLE ARMS.
How do you know if your sunglasses are too big?
The curve should ideally begin just past the top of your ear. If your glasses are too big for you, the curve will not sit snuggly over the ear, keeping the glasses secure.
Why do my sunglasses keep falling off?
There are many reasons that glasses can slip down the bridge of your nose. Perhaps the frames are too wide or you have oily skin. If you have a set of eyeglass tools, you may be inclined to tighten frame screws or adjust nose pads. Although such actions can be helpful, they may not be a permanent solution.
Can I get my Ray-Bans adjusted?
Yes, the glasses must be adjusted to the physiognomy of each one. The glasses and sunglasses come with standard sizes and shapes, although they are our size and they fit well, they can fall off because we need to adjust them to ourselves.
Why are they called Ray-Ban Justin?
The prototype, created in 1936 and known as “Anti-Glare”, had plastic frames and green lenses that could cut out the glare without obscuring vision. The name “Ray-Ban” was hence derived from the ability of these glasses to limit the ingress of either ultra-violet or infra-red rays of light.
Do Ray-Ban Justin have glass lenses?
Ray-Ban continues to use glass in their sunglass lenses because it helps create a surface that is incredibly durable and scratch-resistant.
How much are Ray-Bans worth?
Ray-Ban falls pretty central on the spectrum, with pairs starting around $150 and going up to about $500 for ones made with an ultra-light titanium frame.
How can you tell if a pair of Ray-Bans are fake?
Ray-Ban places one prominent logo on the upper right (your left) lens, and one subtle “RB” etching on the left (your right) lens. On fakes, the logo will look blurry, be out of place, or even scratch off.
Do all Ray-Bans have the logo on the lens?
All new Ray-Bans have a “RB” etched onto one lens (check the far left side of the left lens). On fakes the etching will either be missing or of poor quality. The “RB” etching should be crisp and etched, not painted on.
What model are my glasses?
Prescription glasses or optical grade glasses always have their model name and model number printed on the inside of either the right or left temple (arm) of the frame; model names and model numbers are not always printed in the same place.