A stair skirtboard is a continuous piece of trim or molding for the sides of your stairs to give them a finished look. There are two kinds of skirt boards for stairs. The first type is the one between the stairs and the wall adjoining the stairs.
In this post
Is a skirt board the same as a stringer?
The skirtboard (sometimes called a stringer) is a flat board that is installed along the side of a staircase. Skirtboards can be used to hide the edge of exposed risers or installed on the inside wall of a stair.
How thick is a stair skirt board?
The stair skirt board is a long, unbroken piece of trim, 9 ½ inches wide and ⅝ inches thick. It’s fitted along the closed end of the stairs and is made from a range of materials. Hardwood is usually used to match the stair treads.
Does skirt board go on before treads?
The short answer is it depends. If the staircase will be carpeted or if there is no overhang on the treads then the answer is tread first. Basically this is faster because your treads don’t have to be perfect. Also your skirt doesn’t have to be perfect.
Do I need a skirt board on stairs?
You do not need a skirt board on stairs. If you don’t have baseboards in your house, then you don’t need skirting for your stairs. You might want stair skirting if you have baseboards in your house, as skirting will serve to connect, esthetically, baseboards on either ends of the step.
Should stairs have skirting?
A stairway can look unfinished if you don’t add a skirting, notwithstanding all the normal protective functions that skirting provides. Furthermore, skirting on stairways can provide continuity between levels of the house, which helps with the flow and the overall feel of your property.
What can I use instead of a stair skirt?
The alternative to a skirt board is often baseboards that run along each tread and rise according to the shape of the stairs. Baseboards like these are much more labor-intensive and can be tricky to get right due to the large number of miter cuts involved.
What is the wood on the side of stairs called?
Stringer: what is a stringer? A stringer is the support board that runs along each side of the staircase. The treads and risers are fixed into the stringer or stringer board. A staircase always has two stringers.
What is the trim on the side of stairs called?
Skirtboard. A trimboard running with the rake, pitch or incline of the stair against the wall on the closed side of the staircase. While usually nonstructural, skirtboard protects the drywall surface and adds to the décor of the staircase.
What are stair skirts made of?
Stair skirts are typically made out of MDF or hardwood. While MDF is the more affordable option, it is not as easy to repair as hardwood. Hardwood is a bit more expensive but offers a range of styles and options that complement any decor.
How do you scribe stairs on a skirt board?
After pulling the skirt off the wall, I cut the bottom of the skirt at the lowest scribe line, and tack it back up on the wall, using the reference line to position the skirt at the original angle. Next, I remove the brad from my scribe stick, and I transfer the nosing length of the tread onto the scribe stick.
Do you install risers or treads first?
Do work at least one riser ahead before installing treads. Installing two risers is one way to ensure proper strength and performance. The important thing is to remember to install riser, tread, riser, tread or install the risers first.
What size board is used for stairs?
Stair treads are the horizontal boards that you step on. Stair treads may be made of a single 2×12, but are often made of two decking boards or 2x6s. A stringer is a wide board, usually a 2×12, that runs at an angle from the landing pad to the deck framing and supports the treads.
What is a stair apron?
Apron lining is most frequently used for covering the trimmers below a return balustrade. Generally, apron lining should be used that matches the string of your staircase.
How do you stop baseboard trim on stairs?
How To End Baseboard At Stairs
- Measure the height of the stairs.
- Cut the baseboard at a 45-degree angle using a miter saw.
- Glue and nail the baseboard in place.
- Paint or stain the baseboard to match your stairs.
- Seal any gaps with caulk or silicone sealant.
What are the slats in a railing called?
In furniture construction it is known as a spindle. Common materials used in its construction are wood, stone, and less frequently metal and ceramic. A group of balusters supporting a handrail, coping, or ornamental detail are known as a balustrade.
What are the different parts of stairs called?
The riser is the vertical surface of the stair. The tread on the other hand is the horizontal surface of the stair and the part of the stair you step on. Nosing is the portion of the tread that overhangs the front of the riser. Often a stair builder will talk about the rise and run of the stair.
What are the pieces of wood on a railing called?
Balusters. A vertical stair part turned, carved or otherwise vertical section placed between the handrail and the stair tread or stair stringer. Balusters are typically spaced no more than 4″ apart.
What can you put between stairs and walls?
Caulk the Gap. For stairs, you can use any caulk. However, latex is recommended because it is generally much easier to work with. Any caulk is excellent for this job because it adheres to almost any surface and will flex over time.