MATERIALS
- FABRIC FOR COVERING THE CUPS: elastic or non-elastic thin fabric, e.g. lycra, jersey, lace.
- CUT & SEW FOAM.
- STRETCH FABRIC FOR THE BRA BAND: Lycra, Spandex, Power net with about 25% stretch and good recovery.
- UNDERWIRES.
- UNDERWIRE CHANNELLING.
- BOTTOM EDGE ELASTIC 12mm (1/2″) WIDE.
- FOLD OVER ELASTIC.
In this post
What materials are used to make a bra?
Typical bra cup fabric fibers are nylon, polyester, cotton, Spandex and silk. Bra fabrics are usually a tricot, raschel or even jersey knit. Woven fabrics like stretch silk charmeuse (silk with Spandex) are used for luxury lingerie, as is 100% silk.
Is making a bra difficult?
Making a bra might seem like an extremely complex sewing project, but it is easier than you might think. The first bra you make will be the most difficult, but after that you can reuse the same pattern and make lots of custom bras! Start by getting accurate measurements and choosing a pattern that you love.
What kind of foam is used in bras?
Polyurethane
Polyurethane (PU) foam sheets are used to mould three-dimensional (3D) seamless bra cups of various softness and shapes, which eliminate bulky seams and reduce production costs.
What kind of metal is in a bra?
Metal materials are mainly used for making hooks and eyes of bras, and stainless steel is the mainstream material.
Is it cheaper to make your own bra?
It is actually cheaper than buying a bra. Surprise! Once you have the pattern, all the materials – fabric, findings and trims – can cost as little as $15. Of course you can also spend a lot more too!
How long does it take to make a bra?
For the first bra, plan to spend an evening or so. After this one is fitted and finished, you’ll find that additional bras take two hours or less. Best of all, once you perfect the fit, you can keep the pattern forever, secure in the knowledge that you’ve solved one of a woman’s trickiest wardrobe problems.
What is the best fabric for bras?
Both cotton and microfiber bras are impeccable for everyday wear, and while cotton offers more softness, microfiber bras provide a lighter feeling. Then again, choosing amidst them as per the season is a matter of choice.
How do you sew foam?
For sewing foam, put waxed paper on the top and bottom of what you are sewing, and sew slowly. The bottom piece of waxed paper prevents the machine’s feed dogs from catching on the foam. It may be necessary to raise the pressure foot so the foam can be easily fed through the machine.
Why does a bra have 3 hooks?
Each bra comes with multiple hooks to extend the life of your bra. When a bra is brand new, its fitted to the loosest hook. As time goes by, the elasticity in the band of the bra weakens. As this happens, you move to the middle hook so it fits you like it did when it was new on the loosest hook.
What wire is used for bras?
Heavy gauge (1/8″ wide) coated spring steel underwire for bras, bustiers, corsets or clothing. These wires are considered a regular, daily wear length, which may be shorter than some wires, but are too long for plunge or demi style wires.
What holds a bra together?
The straps go over the shoulders, keeping a bra in place. It is of note that the straps are intended to keep the cup in place, not support the entire weight of the breasts.
How much does it cost to build a bra?
At Bra Theory, the price of your first custom-made bra is $350. Subsequent bras cost $250 per bra. Reactions vary to this price point. You might be asking if a $350 custom-made bra is made of gold, or if it does the laundry.
Why is bra so expensive?
Why Are Women’s Bras So Expensive? Women’s bras are expensive because it requires a lot of labor and unique knowledge to build a bra. A single bra consists of 48 components, from clasp to hooks. You’re not only paying for the bra, and you’re paying for the fit, material, time, expertise, and craftsmanship.
Why are bigger bras so expensive?
The reasons for these higher prices
“Bras in higher cup sizes, because they have to do more ‘work’ (that is, support a heavier weight), also have to be made with stronger and higher quality materials. A flimsy wire or mesh that’s suitable for a smaller cup size is simply inadequate for a larger one.”
How do you clone a bra?
Just the basics of cloning a bra.
And, of course, you need a well-fitted bra.
- Take the wires out of your bra.
- Lay your paper over top of your cardboard and make sure you have a piece big enough for your pattern.
- Start pinning.
- Connect the dots.
- Add in seam allowances.
- Repeat for all your pattern pieces.
What is the softest bra material?
Modal fabric is an ultra-soft fiber made from beech trees. It is stretchy, absorbent, and beyond breathable, making it the perfect foundation for our comfortable mastectomy bras and post-surgical bras.