Medium weight fabrics like cotton, poplin, denim, linen, flannel, gabardine, satin, chino, velour, double knit, and stretch terrycloth require a medium weight interfacing for a soft effect and lightweight canvas interfacing for a crisp effect.
In this post
What kind of interfacing should I use?
Generally you should NOT use a heavier weight interfacing than the fabric, as the interfacing will ‘dominate’ the garment and add an unnatural structure to it. So for medium weight fabrics, use medium weight interfacing. For medium weight knit fabrics, use medium weight knit interfacing.
How do I choose fabric interfacing?
The most important thing to consider when choosing interfacing is the weight of your fabric. Never use interfacing that is a heavier weight than your fabric. It should always be a slightly lighter weight, but stiffer than the fabric that you are using.
When should you choose interfacing?
A good rule of thumb when selecting interfacing for your projects is to choose one with a similar or lighter weight and slightly less drape than your fabric. This will allow the interfacing to add some structure without completely stiffening the shape of your garment.
What is the difference between fabric stabilizer and interfacing?
The biggest difference between stabilizer and interfacing is that stabilizer provides more structure and is usually removed after sewing, whereas interfacing becomes part of the project. When deciding between interfacing and stabilizer, you must consider: Stabilizers are commonly used for tote bags and crafts.
What is Pellon interfacing used for?
Pellon® PLF36 Fusible Interfacing is an ultra lightweight interfacing for light to medium-weight fabrics. It is great for wovens, knits, blouses, and sheer garments. It is excellent for use with crepe de chine, voile, and handkerchief linen fabrics. It can also be used for stabilization of quilting projects.
What are three types of interfacing on what type of fabric would you use each?
Types of Interfacing
- Woven interfacing: This looks like woven fabric.
- Non- woven interfacing: Non-woven interfacing is bonded and has a texture that looks like paper.
- Knit interfacing: This has a bit of stretch and so is useful for interfacing knit fabrics.
Does interfacing make fabric stiff?
Interfacing is a sewing notion that is used to stiffen fabric or help a part of a garment hold its shape.
Can I use sew-in interfacing instead of fusible?
Interfacing gives structure to “limp” fabric. There are 2 main types: sew-in and fusible.
Sew-in interfacing vs fusible: what’s the difference?
| ———— | Sew-in interfacing | Fusible interfacing |
|---|---|---|
| How it’s applied | Sew around the edges | Glued on using an iron |
| Speed | Slower (baste and sew) | Fastest (just iron) |
Can I use fusible interfacing on linen?
Cotton, poplin, linen, gabardine, and linen can stand the heat required for fusible interfacing. On velour, knit, satin, and terrycloth use sew-in interfacing.
Do you need to prewash linen before sewing?
If you buy linen that hasn’t been pre-washed, make sure you run it through a hot wash before you start working with it. Even if your finished garment will be cool-washed, it’s good to use hot water for this first wash to ensure you reduce the chances of any further shrinkage.
What needle do I use to sew linen?
I would recommend a universal needle of 80/12 for medium to heavy weight linen. Fine linen fabrics (such as Nani Iro Hakko Fine Linen) require a 70/11 size needle.
What is the stiffest interfacing?
heavyweight interfacing
As the stiffest interfacing, heavyweight interfacing gives hat brims and bag bottoms their stability. It comes in one-sided or two-sided fusible variations, or without fusible (look for “sew in” on the packaging). Avoid using fusible on delicate fabrics that can’t be ironed.
Which side of interfacing do you iron?
Place your interfacing right side down on the wrong side of your fabric. In other words, place the fabric on your ironing board wrong side up. Then place your interfacing on top of the fabric right side down. The right side of the interfacing is the sticky side with raised bumps.
What can I use if I don’t have interfacing?
Can you substitute interfacing? The short answer is YES!
- Use muslin, broadcloth or linen for your “interfacing.”
- Be sure to pre-wash your outer fabric and your substitute fabric to avoid major issues in the future.
- Use a baste stitch (3.5 stitch or wider) to add your substitute fabric to your main fabric.
Is Heat n Bond the same as interfacing?
Fusible Web: Adhesive on both sides, this type of interfacing is used mostly for appliqué. It is also known as Stitch-Witchery or Heat ‘n Bond.
Is iron on adhesive the same as interfacing?
One of the major differences is that interfacing is actually a fabric while the fusible web is a fibre. There are many different ways in which you can use both materials and have many great factors for using in different forms of sewing and crafts. Both are viable for using with clothing projects, quilting and crafts.
How do I choose a Pellon interfacing?
The choice between a fusible & a sew-in interfacing depends on the fabric, the degree of firmness desired & personal preference. Fusibles are great time savers. They’re easy to work with & are compatible with most fabrics. They make a fabric slightly crisper than a sew-in interfacing of comparable weight.
Does fusible interfacing wash out?
Should you prewash fusible interfacing? Some fusible interfacings will shrink when washed in your final garment. This will cause them to pull away from the fabric, creating “air bubbles”.
What’s the difference between woven and non-woven interfacing?
What is the difference between non-woven and woven interfacing? Woven interfacing looks and acts like fabric and needs to be cut along the grain. While non-woven interfacing looks more like paper and can be cut in any direction. Both can be found as either a fusible product or sew-in product.
How do I know if my interfacing is fusible?
Lay the interfacing on top of the fabric, fusible side down. Pro Tip: It’s easy to tell which side is which. The fusible side is somewhat bumpy, while the non-fusible side is smooth. 3.