Start by hanging one end of the swag over one end of the rod. Then, hang the other end of the swag over the other end of the rod. Let the fabric in the middle drape down. When you’re finished, the draped fabric in the center should look like a regular curtain swag.
In this post
How do you hang a swag without a rod?
Using A Pair Of Hooks
Hooks are one of the easiest rod substitutes out there. To use them, just install some large hooks on either end of the window. Then, drape the swag curtains over each hook, pulling the curtain through the hooks.
How do you hang swag curtains with knots in corners?
Adjust the swags and the curtain to ensure that both hanging sides are equal and the swags are how you want them. Carefully grasp one side of the curtain where it meets the end of the drapery rod. Fold it in half to make a loop and pull the hanging side through the loop to create a loose knot.
What can I use instead of a curtain rod?
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
How do you hang a swag wreath?
- Gather Natural Materials. Collect your natural materials.
- Dunk the Foam Block. In a bowl, place water and then the foam block.
- Bend a Coat Hanger. To create the hanger, take your coat hanger and, starting at the bottom middle, bend it upward.
- Secure the Hanger.
- Design and Embellish the Swag.
- Hang the Swag.
- Enjoy!
How do you hang a swag valance and curtain on a single rod?
How to Hang a Swag Valance & a Curtain on a Single Rod
- Shirr the Curtain on the Rod. Shirr the curtain on the rod.
- Create Temporary Folds.
- Check That the Ends of the Folded Valance Are Even.
- Adjust the Valance.
- Tuck the Valance Behind the Curtain.
- Take Your Measurements.
- Position to Your Liking.
Do you need two curtain rods to hang a valance?
We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).
How do you hang curtain swags?
Start by hanging one end of the swag over one end of the rod. Then, hang the other end of the swag over the other end of the rod. Let the fabric in the middle drape down. When you’re finished, the draped fabric in the center should look like a regular curtain swag.
How do you keep a scarf valance from slipping?
Keep the swag from slipping by attaching the underside of the valance to the top of the rod with two-sided tape.
Is there a way to hang curtains without putting holes in the wall?
How to Hang Curtains Without Drilling: 3 Methods
- Secure the hardware with adhesive hooks. Adhesive hooks or adhesive strips are versatile hanging tools you can purchase in various sizes and strengths.
- Use magnetic curtain rods.
- Use tension rod curtains inside window frames.
How long should swag curtains be?
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining. Place the fabric and lining right sides together.
How do you attach a swag to a door?
Use removable adhesive hooks to hang the garland without leaving marks. Attach adhesive hooks around the frame of the door about 12 in (30 cm) apart. Wrap the garland in wire, and wait a few minutes for the adhesive to bond with the door before you hang the garland by its wire.
How do you hang curtains over a rod?
Drape them over their respective ends of the curtain rod, with the widthwise folds placed at the top of the rod. For a single swag, fold the curtain in half widthwise. Pass the folded end of the curtain behind the rod, and then pull it over the top of the rod. Pull the folded end down to your desired swag length.
Where should valance rods be placed?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
How far down should a valance hang?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How far should curtains stick out from wall?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
What Is a waterfall valance?
A waterfall valance is a special window treatment that drapes down to resemble a waterfall and can give your windows a refined appearance.