Just do a fast running stitch all around the existing hole. :D. Thread your needle again and insert it between the jeans and patch so the knot lays between them and stitch from there. Once you’re done, tie everything off and snip all the loose ends.
In this post
How do you fix holes in stretched jeans?
Pressing flat with a hot steam iron will help give a crisp edge to the patch. But there are other ways to finish the raw edges of a patch for less bulk or a different look. With a sewing machine, you could sew a zig-zag stitch set at a short stitch length (about a 2) to encase the edge.
Can you put holes in stretchy jeans?
Jeggings are tight jeans that can be ripped to add a fun, casual vibe. It’s easy to distress jeggings with a pair of scissors and some tweezers. The process should only take a few minutes. When you’re done, you’ll have a fun new pair of jeggings to wear.
Can you sew stretchy jeans?
If my denim has spandex in it, I use a stretch stitch, such as a narrow zigzag. I like a 1.5 mm wide by 2.5 mm long zigzag. Sewing stretch denim with a straight stitch can lead to popped seams (ask me how I know!). A new denim needle, either size 90 or size 100, is vital.
Do iron on patches work on stretchy fabric?
I put a regular patch on my jeans and within 5 minutes it just pulled off. This worked great on my stretchy jeans! The edges do curl up a little after being washed; eventually I’ll need to sew the edges on. But for now it works great!
How do you cut holes in jeans with scissors?
Take your scissors (a penknife is also ideal as they are very precise) and use the edge (not the tip) to scrape down the length of the jeans horizontally in the areas that you want the rips to form. Stop when you start to see the white threads. Grab your tweezers and sporadically fray threads.
How do you make small holes in jeans?
Steps
- Gather supplies and prepare a patch large enough to cover the hole.
- Place double sided tape on the patch.
- Press the patch over the hole on the inside of the jeans.
- Sew over the hole and gently pull the edges of the rip together.
- Trim away the edges of the patch on the inside.
- Done!
Can you use iron on patches on inside of jeans?
Option 1: Iron-On Patch
If you have a small hole in your jeans, an iron-on patch is an easy solution. Measure the hole and cut a piece of denim fabric that’s at least 1/2 inch larger than the hole. If you’re using scrap denim and fusible, you’ll attach the patch from the inside of your jeans.
How do you rip jeans with a razor?
One of the quickest ways to fray denim is with a regular disposable shaving razor or sandpaper. These are particularly helpful when going over the zipper area, waistband, and pockets. Just scrape the razor or press the sandpaper back and forth until you get the look you want.
What is the best stitch to use on stretchy fabric?
zigzag stitch
We recommend using the zigzag stitch on your sewing machine as it allows the fabric to stretch and retract with the thread. The twin needle will do two rows of zigzag stitching, offering a more secure stitch with a professional finish.
What needle do you use for stretch fabric?
ball point needle
Use the ball point needle when sewing on stretch fabrics or fabrics where skipped stitches easily occur. We recommend needle HG-4BR (Organ). Schmetz needles “JERSEY BALL POINT” 130/705H SUK 90/14 may be used as a substitute.
Do you need special thread for stretchy fabric?
All-purpose polyester thread will work fine as it has some give when stretched. Cotton thread is not recommended. If the item you’re making needs to be stretchy or form-fitting to the body, you may want to use elastic thread. Only use elastic thread in the bobbin of your sewing machine, and wind it by hand.