After your jeans are sufficiently distressed, take your scissors or knife and use the edge (not the tip) to start horizontally scraping the area where you want your rips to be. If you don’t want holes all the way through, scrape enough that you start to see the white horizontal threads beneath the denim’s surface.
In this post
Can scissors cut through jeans?
Make Sure Your Scissors Are Sharp
Don’t use an old pair of scissors to cut your new pants. Like a good knife for cooking, you need good sharp scissors for cutting. Cut slowly across each leg separately. Do not try to save time by doubling the left and right leg.
How do you cut holes in jeans yourself?
If you want to create holes, use scissors, a razor, or a sharp knife to rip your jeans. X-acto knives or box cutters will work as well. To create a frayed look, use sandpaper, a cheese grater, steel wool, or a pumice stone.
How do you make holes in jeans with scissors and tweezers?
All I did was use that crease as a guide, take my scissors, and cut the length of the jeans off. Then, like the edges of our knee holes, I grabbed my tweezers and roughed up the hemline, just randomly pulling on the edge until the hem was less clean and more destroyed. Perfect!
How do you cut jeans with a razor?
One of the quickest ways to fray denim is with a regular disposable shaving razor or sandpaper. These are particularly helpful when going over the zipper area, waistband, and pockets. Just scrape the razor or press the sandpaper back and forth until you get the look you want.
How do you turn regular jeans into ripped jeans?
STEP BY STEP:
- Mark the jeans where you want the rips.
- Cut the jeans using scissors.
- Use sandpaper to roughen edges.
- Use tweezers to pull out loose threads.
- Wash the jeans on a low-temp delicate cycle.
- Tumble dry.
- Admire your handiwork!
Can fabric scissors cut denim?
Fabric scissors should cut most types of fabric. But, for heavier, thicker materials, such as leather and denim, a pair of heavy-duty or electric scissors may be best. Crafting or quilting fabrics, like cotton and felt, are somewhat stiff. Most scissors can easily cut through them and leave a smooth edge.
How do you cut jeans without fraying?
Throw your jeans into the washing machine and dryer to get a fluffier frayed edge, and then trim off any too-long threads if needed. As an optional step to prevent further fraying, you can try applying an anti-fray product along the hems and letting them air dry. Hope this was helpful!
How do you make holes in jeans with string?
To create holes, use a pair of small but sharp nail scissors; precision is key here. Wedge a piece of cardboard or a small wooden block inside the legs to protect the back of the jeans – this look is meant to be uncontrived so any symmetry will look obvious.
How do you make ripped jeans without sandpaper?
Although you can make ripped jeans without this, the coarseness of the sandpaper will make it easier to distress the denim and pull out the threads. Go for a 30- or 60-grit sandpaper. If you don’t have sandpaper, try to find a cheese grater, steel wool, pumice stone, or foot file for a similar effect.
Can I cut fabric with regular scissors?
Can you cut fabric with normal scissors? Normal scissors for general purpose use will struggle to create a clean cut in fabric. Normal scissors have thinner, shorter, and blunter blades than fabric scissors.
Can you cut fabric with paper scissors?
Paper scissors are clearly used for paper and anything else that is not fabric. They are less expensive then fabric shears but will not last as long on fabric because the blades will eventually become dull and create jagged edges.
What scissors are used for cutting fabric?
Dressmaker’s shears have a long blade, making them ideal for cutting out fabric. These scissors have tapered blades with one pointed and one rounded tip; the blunt tip prevents fabric from snagging on seams and threads. It also has a handy point for clipping and notching curves.