At The North Face®, when we say a fabric is waterproof we mean it’s impervious to water. We test our waterproof fabrics in lab conditions to ensure the fabric can withstand a given amount of water. Once the fabric passes that test, it can be called 100% waterproof.
In this post
How do I know if my jacket is waterproof?
Water-resistant jackets and pants usually have a DWR (durable water repellent) finish on the exterior that repels moisture and keeps you dry in light rain or snow. If the jacket features a waterproof breathable membrane, laminate or other comparable waterproof technology, then it is usually considered waterproof.
Can North Face jackets get wet?
It is possible to clean your down jacket yourself, but you should err on the side of caution; when wet, the down filling gets clumpy and if not dried correctly it will not perform as effectively as it should.
Is a North Face puffer jacket waterproof?
We coat many of our products with a durable water repellent (DWR). Together with a tightly-woven, i.e. water-resistant fabric, this provides a good level of protection from rain and snow. We also apply a DWR to many of our waterproof jackets.
How can you tell how waterproof something is?
Waterproof ratings are measured in millimetres using a Hydrostatic Head test. In a Hydrostatic Head test, the fabric is pulled tight under a 1 inch diameter sealed tube of water. This is then observed over 24 hours to ascertain how many millimetres of water the fabric can withstand before it soaks through.
Does rain proof mean waterproof?
Truly waterproof gear means you can submerge the product under water and no moisture will get inside.
And there are two ways to seal seams:
| Waterproof Rating (mm) | Water Resistance Provided | Conditions |
|---|---|---|
| 20,000+ | Rainproof and waterproof under high force | Heavy rain, wet snow, some force |
Is water-resistant the same as waterproof?
A waterproof item of clothing will give the wearer protection from water for a significant period of time. WATER-RESISTANT: A water-resistant material or product will prevent water penetration, but only to a certain level.
How do I get my North Face jacket waterproof again?
Dry the garment in a regular tumble dryer, on a cool setting, or use an iron on a cool setting to revive the DWR finish. This process should revive the DWR.
Is The North Face Nuptse jacket waterproof?
The features on the Nuptse are a little light on the ground, but nothing key is missing. There is a standard center zip closure on the front of the jacket, but no storm guard so it’s not super waterproof. The cuffs adjust with Velcro tabs, and a bungee cord cinches the hem. Up top you’ve got an uninsulated hood.
Can puffer jackets be waterproof?
Are RAINS puffer jackets waterproof? Yes, RAINS puffer jackets are completely water-resistant and windproof. The good quality ensures your jacket will last for many years.
Can you wear Nuptse in the rain?
The North Face’s most versatile down jacket. Wear it alone in cold, dry conditions or under a weatherproof shell for complete snow and rain protection.
What makes a jacket waterproof?
Water-resistant jackets will have a waterproofing repellent coating (called DWR) applied to the outer fabric to prevent absorption of water, this means that water droplets will bead and roll off the fabric.
How do you waterproof a puffer jacket?
To be fully waterproof the seams also need to be taped. Spraying your down jacket with a waterproofing agent such as Nikwax TX Direct will only apply a layer of DWR (Durable Water Repellent) coating to the fabric. (Just in case you didn’t know, there’s already one on there!)
Is 10K waterproof enough?
A rating of up to 10K is enough to handle light to average rain for a short amount of time. Ratings between 10K and 15K can handle a moderate amount of rain for much longer, and jackets rated between 15K and 20K or higher are serious shells for heavy, intense rain over a prolonged period.
What’s the best waterproof rating?
IP68 ratings occupy the very top of the IP rating scale. Both digits are at their maximum level: A 6 for total protection against solid ingress. An 8 for total protection against water ingress, up to and including complete submersion below one meter and for more than 30 minutes.
What IP rating is waterproof?
IP ratings of IP65, 66 and 67 are considered waterproof.
How do you waterproof a non waterproof jacket?
A non-waterproof fabric cannot be made fully waterproof.
Method Two: Waxing the Jacket
- Choose a Wax.
- Melt the Wax.
- Apply the Wax to the Jacket.
- Melt the Wax into the Fabric.
- Let Cool and Reapply.
- Allow to Cure.
Does waterproof mean it can go underwater?
Let’s explore the differences between Waterproof and Water-Resistant. Waterproof means the bag can be submerged completely underwater for long periods of time, and there won’t be one single drop of water that enters the interior. Think of a balloon, completely sealed off from the outside world.
Does splash proof mean waterproof?
A “water-resistant” or “splash-proof” speaker is safe for splashes or rain. A “waterproof” speaker typically has an IP67 rating, meaning it’s safe for up to 30 minutes in a meter of water. “I have a JBL Flip 3 that’s splash-proof, so if it ever rains or gets splashed, it’s OK.
How long does waterproofing last on jackets?
If you wear the jacket frequently and are out in all conditions we recommend reproofing every three to four months. However, if you wear your jacket less frequently or are out in less extreme weather, then reproofing your jacket every six months should be sufficient.
Can you wash a North Face waterproof?
Washing a Waterproof North Face Jacket. Place the jacket in a front-loading washing machine on a low spin, double rinse cycle. Make sure all pockets are zipped up and all Velcro straps are fastened. Do not use a top-loading washing machine; the center agitator will cause damage to the jacket, particularly the pockets.