Use firm, tightly woven fabric for this installation method. Stitch the casing to the fabric along both edges, creating a channel wide enough for the boning to slide into and narrow enough to keep the boning from twisting in the casing. Machine-stitch across one casing end before inserting the boning.
In this post
What material is used for boning?
The most common type of plastic boning – and the most widely available – is known as “Rigilene” which is made from polyester, a type of plastic. Rigilene has been the boning of choice for many a dressmaker over many a decade.
How do I create a channel boning?
Stitch the casing to the fabric along both edges, creating a channel wide enough for the boning to slide into and narrow enough to keep the boning from twisting in the casing. Machine-stitch across one casing end before inserting the boning. Hand- or machine-stitch the opposite end after the boning is inserted.
Can you make boning casing?
Different methods of making boning channels have different pros and cons. Making your own boning casings gives you the complete power and control over the durability and looks of the channels. With that in mind, it is more time consuming than other methods because you have to make it from scratch.
What is plastic boning?
Product code 204 03-0003. A flexible, synthetic whalebone for use in corsets. Light and flexible, it works well in reinforced bodices, lingerie corsets, and crinolines or can be combined with steel boning to make a corset lighter.
How wide are boning channels?
The boning channel must be 2mm wider than your bone. So if your bone is 7mm, then your channel must be 9mm wide. You must sew very straight lines because your channels will be sewn from the RIGHT SIDE of the corset and these basting lines are guide lines for your sewing machine.
Can you make a corset without boning?
Without boning, your corset would fall down (like most strapless dresses) and crumple around the waist (like your typical tube top). Vertical tension holds the corset upright. The overall construction of a corset, including the number and type of bones, supports the design and shape but doesn’t create it.
What is polyester boning used for?
Boning helps a garment maintain its shape and stay wrinkle-free. While it is most often used in a corset, bustier, swimsuit or strapless gown, it can also be used strategically in other garments. Use boning to stand up a collar, keep folds or pleats in place, and keep necklines from sagging.
Can I sew through plastic boning?
The advantage of using Rigilene Boning is that you can sew right through it, eliminating the need for a boning casing. Simply sew it right onto your garment. Customers use this boning for garments such as strapless dresses, the lower cups of bras, and bustiers.
What is flat steel boning?
Flat steel boning is made of strips of spring steel sheets, carefully blunted on its sharp edges and coated with a rust protectant. Spiral steels take the form of a flattened coil, carefully capped, and are noted for their greater mobility.
What is spiral steel boning?
• Made of hardened, galvanized, spring steel round wire. • Offers flex on two axis. • Perfect for curved areas; provides comfort & flexibility. • Pre-cut lengths or continuous.
Do I need bias tape?
Bias tape is perfect for a decorative finish on a curved edge because the bias will bend and ease around the curve. A straight-grain strip will not curve without kinks and warping. Bias is used in many quilting techniques and sewing projects.
How do I stop my corset boning from bending?
The best way to keep a corset from bending is to make sure you purchase the right size and style for your body and season it correctly. Follow tutorials on how to properly lace your corset, as well as put it on, tighten and loosen laces, and take it off.
How thick should corset boning be?
We offer tips for both 1/2″ wide and 1/4″ wide widths. The Metal Bone Tips are also recommended for Hoop Boning in 1/2″ width. Plastic Rigilene Bone tips are recommended for Rigilene Boning.
What is corset boning made of?
Bones, and the substances used for the purpose, are generically called “boning”; however, the name likely arises from the use of whalebone in early corsets. Today, many corsets use nylon or Rigilene boning, although steel is still favoured for high-quality corsets.
How many yards of boning do I need for a corset?
2 yards may seem long, but it makes it easier to get into the corset by yourself. 2.5 yards of 1-inch-wide ribbon of your choice (for variations 1 & 2). A busk. boning.