As a general rule, grommets on a corset should be set no farther than about 1″ apart from each other. High-end and antique corsets often, though not always, have the grommets spaced closer at and next to the waist, the better to accommodate and distribute the additional pressure in this region.
In this post
How far apart are eyelets?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
How big should corset eyelets be?
Size #00 is the standard smaller size grommet for regular corsets. Size #2 grommets are larger, our customers use this size for “Steampunk”, “Hobbit”, “Medieval”, or “Pirate” type corsets or costumes.
How many eyelets should a corset have?
You need two part eyelets because the washer part of the eyelet, sandwiches and encloses the fabric safely and ensures a smooth finish to the inside of the corset. One part eyelets which do not come with a washer, are not strong enough for corsetry.
How many grommet panels do I need?
Make sure that the fullness of your curtains is about twice the width of the window. So if your window is 50” wide, you will want 100” of panel curtains. It is important to keep your window balanced. So if you put two panels on one side, then put two panels on the other side as well.
What size grommet do I need?
What Are The Standard Grommet Sizes? The most common grommets for banner sizes are 3/16 of an inch, 3/8 of an inch, one half of an inch, 1 inch, 7/16 of an inch, three, in the most widely used size being a grommet is 3/8 of an inch.
What is the difference between a grommet and an eyelet?
A grommet is very similar. Grommets are typically used for more heavy duty materials and usually are bigger in size. Eyelets are often used to finish off the opening for a drawstring casing. A buttonhole will serve the same purpose, but an eyelet can be a professional looking detail.
How is a grommet measured?
Sizes for grommets are generally listed as a the measurement of the inside diameter (the hole). In the chart below we have provided exact measurements for inside diameter/outside diameter/depth. For size 12, we carry both size #12 and size #12L, both have same inside diameter but 12L is wider overall.
How far apart do you put grommets on curtains?
Space grommets that are up to 2 inches in diameter approximately 4.5 to 4.75 inches apart, measured from the center of one grommet to the center of the next.
How far should finial stick out?
The standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be four to 10 inches. As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame.
How wide should my curtain panels be?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
Why do eyelets split?
If there is nothing technically wrong with the grommets then there is probably not enough material in their grip when you are attaching them. Thus they over crimp and split.
How do you reinforce grommets in fabric?
You’ll want your grommet to stay in place. To prevent ripping it out, I usually add a piece of interfacing at the back of the fabric to reinforce it. For smaller projects and smaller grommets, this is as simple as a scrap piece of mid-weight fusible interfacing like Vilene H250 or fusible fleece, or something similar.
Which is stronger eyelet or grommet?
Grommets are much stronger than eyelets and used in situations that call for a more reinforced and longer lasting hold, such as permanent signage and heavy curtains or drapes.
How big is a grommet hole?
Grommet Size Chart
| Size | ID (inner diameter) | Hole Size |
|---|---|---|
| #0 | 0.248 | 1/4 |
| #1 | 0.287 | 9/32 |
| #2 | 0.362 | 3/8 |
| #3 | 0.433 | 7/16 |
What can you use instead of grommets?
A webbing loop is a great alternative to a grommet for things like sails, tie downs, fabric covers and more. Webbing loops are very useful, and they even have some added benefits versus installing grommets.