Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it’s fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.
In this post
Should you put a sealer over stain?
Most stains should be sealed to prevent bleeding. After smoothing the stained wood, apply a sealer coat of thinned shellac, sanding sealer, or other appropriate sealer. Do not use shellac with NGR or water-base stains. If you plan to finish the piece with polyurethane, make sure the sealer is compatible.
Should you stain or water seal first?
The order which you apply stains and sealants varies on what you’re currently working with. For the best performance, we recommend stain first, seal second, and apply Advance Topcoat third. This will provide the best protection of your home.
Should you seal a deck after staining?
Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface. Water-based stains can be cleaned up with water.
What is the best sealer for stained wood?
Polyurethane Wood Finish
- Polyurethane wood finishes are synthetic coatings that are highly durable and water resistant, making them the best clear coat for wood protection.
- Water-based polyurethane dries quickly and can be used on bare, stained or painted wood.
How long after staining can I seal?
How long should you wait between applying a stain and a polyurethane coating? Considering that most commonly used stains take between 12 to 24 hours to dry and cure completely, it’s good practice to wait a full 24 hours before applying polyurethane sealer to your workpiece after your stain has been applied.
Should I seal wood after staining?
Yes, sealing wood after staining it is essential to protect it from damage and discoloration from foods, liquids, human touch, and piercing objects. While wood stain may seal the pores and offer some protection from moisture and water damage, its primary purpose is to color natural wood.
What do you put over stained wood?
Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats. If using a spray can, hold 8 to 12 inches from the surface and apply two or three light coats.
How long does Thompson’s water seal last?
4 years
Water Seal can only be used on bare and uncoated brick, stone or concrete. How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.
What’s better than Thompson’s water seal?
According to them, these are the nine most effective wood sealers:
- Thompson’s Water Seal.
- Rainguard Premium Wood Sealer.
- DEFY Crystal Clear Sealer.
- Anchorseal 2.
- Roxil Wood Protection Cream.
- Eco-Advance Exterior Wood Waterproofer.
- Ready Seal Stain and Sealer for Wood.
- Pure Tung Oil Natural Wood Sealer.
How long does it take for Thompson’s water seal to dry?
Drying. Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson’s® WaterSeal® Waterproofing Wood Sealer – Clear.
What is better stain or sealer?
Unlike sealers, stains penetrate into the wood. Like the name suggests, a wood stain contains pigments that physically change the wood’s color. This gives the wood protection against harmful UV rays. Stains also have the same beneficial water-repelling qualities.
Can you put a clear coat over deck stain?
Clear finish can be applied over stain or directly to raw wood. It’s an extra step, but it’s always worth the time. A clear finish provides a protective coat for your wood that guards it against stains, water damage, and natural wear and tear.
Why does stain peel off my deck?
Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.
How many coats of stain should you put on a deck?
two coats
We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.
How many coats does Thompson’s water seal have?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
Is Thompson’s water seal oil-based?
Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration.
Is Thompson water seal any good?
Is Thompson’s WaterSeal Any Good? Our experience with Thompson’s WaterSeal Waterproofer Plus Clear Wood Protector was disappointing overall, and we would not recommend this product. Its inability to prevent UV graying is too harmful to your deck’s wood.
Can I apply a second coat of stain a week later?
Can I Apply a Second Coat of Stain a Week Later? No, applying a second coat of stain a week later is a bad idea. If you apply another coat of wood stain after a week, it will not adhere to the wood properly. As a result, any finish you use on top will experience adhesion problems and peel off.
What happens if you don’t wipe off wood stain?
Wood stain works by penetrating the pores and grain to color the wood. Therefore, whatever remains on the surface must be wiped off for the stained wood to dry properly. What is this? If you do not wipe off the stain or spread it too thickly, it will become sticky and blotchy as the solvents within the stain evaporate.
What happens if you stain over stain?
Yes! Staining on top of older stain is perfectly fine. You will need to understand your specific project and plan before you begin but staining on top of old stain is fairly simple. As we mentioned earlier, staining on top of old stain works best if you want a darker stain.