If you knit from the top-down, as a rule of thumb, you’ll need to cast on around 14 or 15 stitches per needle (56 or 60 stitches total) if you have a regular woman’s size and 16 or 17 stitches per needle (64 or 68 stitches total) for a regular men’s size.
In this post
How do you calculate stitches in knitting socks?
Measure around the ball of your foot (in inches) and multiply that measurement by the number of stitches per inch from your swatch.
How do you figure out how many stitches to cast on?
The Stitches to Cast-On = (dW x S/W). Divide Stitches counted in swatch by swatch Width measured. Multiply by Desired Width. So for the example for the above you will take your 4×4 measured area.
How many stitches do you cast on for toe up socks?
The Fingering-Weight Toe-Up Sock for Adults calls for 56 stitches around the cuff for a medium, or 28 stitches on each needle. Find a cable pattern that is 4 or 7 stitches wide, and work it along the top of the foot, knitting the sole of the foot in Stockinette stitch, and then work the cables around the entire cuff.
How long should I knit the foot of a sock?
Knit the cuff to your desired length (1 to 2 inches for anklets, 6 to 8 inches for standard socks). Keep in mind that if you make very long cuffs, it may be necessary to start out with more stitches, because your leg gets wider toward the top.
What’s the average amount of stitches?
Average – 6 stitches per inch. Accomplished – 8 stitches per inch. Expert – 10 stitches per inch. Professional – 12 stitches per inch.
How many stitches is 30 inches?
Calculation in inches:
30 x 16 (30 multiplied by 16, divided by 4) Result: 120 stitches.
What is the best cast on method for socks?
Cuff-down cast-ons
Cuff-down is the most popular way to knit socks. The cast-ons for this method are endless since you can cast on just like you would for any other project.
What size needles for sock knitting?
Knitting needle sizes: 1-3
The sock sneaks up on all us knitters at some point. Most socks are knit using a size 1 or 2 needle, but you can also find sock patterns that are designed for heavier non-sock yarns. In addition to socks, you can knit up beautiful shawls using sock-weight yarn and these small needles.
How many cast on for DK socks?
Simple Sport/DK Sock Notes. Using a US2/2.75mm circular needle and two strands fingering weight sock yarn held together, cast on 52 stitches with the German Twisted Cast On method. Divide the stitches so they are distributed evenly in half between each needle.
How do you finish a toe sock?
If you’re looking to finish your own pair of toe-up socks, I have two recommendations for you.
Here’s all you need to do.
- Knit two stitches.
- Slip the left needle into the front of those two stitches.
- Knit the two stitches together through the back loop.
- Knit a stitch.
- Repeat steps 2-4 until you finish.
How do you measure your foot for socks?
Place a tape measure on the floor. Position the back of the heel at the zero mark on the tape, then measure to the longest toe. As with the foot circumference, make sure the sock wearer’s foot is planted on the ground so you can get an accurate measurement.
How long is a men’s size 12 sock?
| ..Men’s Shoe Size.. | …Leg… | Total Foot Length |
|---|---|---|
| 12 | 7 7/8″ | 11 1/4″ |
| 12 1/2 | 8 1/8″ | 11 1/2″ |
| 13 | 8 1/4″ | 11 5/8″ |
| 13 1/2 | 8 1/4″ | 11 3/4″ |
How tight should knitted socks be?
Socks should be worn with a little bit of negative ease—that is, they should be smaller than the foot (and leg) they’re to cover. You want the sock to have to stretch a bit so that it will stay up on your leg and stay in place on your foot.
What are men’s sock sizes?
Men’s socks are typically listed on sock packaging as “Size 10-13.” This translates to a men’s U.S. shoe size of about 8-12.5.
How far apart should stitches be?
Suture Spacing
The distance between sutures should be roughly ½ the length of the individual sutures. Place the first suture in the center of the wound if approximation will be difficult, continuing by closing the distance to the wound edges by ½ to minimize tension forces on the tissue wall.
Should wound bleed after stitches?
Oozing small amounts of blood is normal. You have trouble moving the area near the cut. You have symptoms of infection, such as: Increased pain, swelling, warmth, or redness around the cut.
Do I need stitches if it stops bleeding?
A cut may need stitches (or other treatments) if: the bleeding does not stop after 10 minutes of applying pressure. the cut is long or deep. something is embedded within the cut.
How many stitches make an inch?
The needle size you use to get 5 stitches per inch could be the same for both yarns (an average knitter would usually get 5 stitches per inch on a US 7 / 4.5 mm needle), but sometimes the weight of the yarn affects how tightly or loosely you knit.
What happens if you have too many stitches per inch?
If you have too many stitches per inch, your project will be too large. If you have too few rows or stitches, then the finished item will be too small. You can measure your gauge by knitting a small tension swatch and counting the number of stitches and rows fit in four inches.
What is the best stitch length for sewing a straight stitch?
approximately 2-2.5mm
Set the machine for straight stitch, with a stitch length of approximately 2-2.5mm. Sew, just inside the seam allowance.