The Ray-Ban logo will be etched on the top left of the glasses. If it can be scratched off, the frames aren’t genuine. ‘RB’ will also be etched on the bottom right of the frames next to the hinge. Frames produced prior to 2000 will have the Bausch & Lomb logo, ‘B&L’ etched there.
In this post
How can I tell if my Ray-Bans are fake?
Original Ray-Ban sunglasses will have “RB” or “Ray Ban etched onto the corner of the left lens to prove its authenticity. If the etching is missing, or a low quality or painted on the glasses will be fake. Other signs to spot a fake pair of Ray-Bans include the packaging and way in which they are boxed to ship.
Can you fix scratched Ray-Bans?
A scratched or cloudy Ray-Ban lens needs to be replaced as soon as possible. Not only does it not look good, but damaged lenses can also affect vision in more ways than one. However, buying a new pair of Ray-Bans just because a lens is damaged is a costly option.
Do all Ray-Bans have the logo?
Ray-Ban Fake Check Three — Nose around the pads
Some, but not all, Ray-Bans will also have a little RB logo etched under the transparent resin pad. For Aviators, also check that the size code is etched under the nose bar and matches the code on the inside left temple arm.
Do Ray-Bans have a warranty?
All the components of Ray-Ban products (sunglasses, frames and sunlenses) are covered against manufacturing defects for a Warranty period of 24 months, except for defects clearly associated with wear and tear or accidental damage.
Are all Ray-Ban lenses etched?
If the engravings don’t look very well-made, there’s a good chance that the glasses aren’t, either. Look for a poor “RB” etching on one of the lenses. Most models of Ray-Ban glasses will have a small, almost-imperceptible “RB” etched in the trademark Ray-Ban font on one of the lenses.
Does Amazon sell fake Ray-Bans?
Please note that Amazon.com is an authorized online dealer of Rayban if the purchase is being made directly from Amazon. If the purchase is made by a 3rd party dealer on Amazon then we cannot guarantee if the product will be authentic.
When did Ray-Ban start putting the logo on the lens?
They must have started to stamp them when B&L got out of the frame and lens business and somebody else to over the brand. When we first started to contract manufacture Ray Ban’s for B&L in 1987, the lens logo was already there. The B&L logo was sand blasted onto the lens.
How much does it cost to fix Ray-Bans?
Average cost and duration for eyewear repairs
| Common Repairs | Average Cost | Average time frame |
|---|---|---|
| Adjustments and Overhauls | $10 to $39 | 24 to 48 hours |
| Broken Screws on Eyewear Frames | $12 to $29 | 24 to 48 hours |
| Rivets and Pushings | $16 to $49 | 24 to 48 hours |
| Scratched and Broken Lenses | See Lens Page | 24 to 72 hours |
Why does toothpaste remove scratches?
Paste-based toothpaste acts as a mild abrasive that levels out the scratch, removing it or making it less noticeable.
Does toothpaste remove scratches from glasses?
Rubbing your glasses when dirt, lint, or dust is on the lens can cause scratches. For this reason, toothpaste and baking soda, which have gritty textures, won’t fix scratched lenses.
How can you tell fake Ray-Ban wayfarer?
The lenses: The right-side lens should have the distinctive, cursive-lettered Ray-Ban logo near the top right corner. Inspect the lettering under a magnifying glass: It should be crisp and clean. Fakes are often messy and jagged. The left-side lens should have the letters RB etched into it — not painted or glued on.
Why do my Ray-Bans say Made in China?
Luxottica, the world’s largest eyewear company, OWNS Ray-Ban (along with many other well-known brands). They have chosen to use China as a manufacturing location along with Italy.
How can I fix the scratches on my glasses?
Mix one to two tablespoons of baking soda with warm water until it forms a thick paste. Apply the baking soda-water mixture directly to the scratched part of your lenses using a cotton ball or a clean microfiber cloth. Use a consistent, circular motion and gentle pressure without pushing down too hard.
How do you get rid of scratches on sunglasses?
“What you do is apply a small amount of baking soda-based toothpaste to a cotton ball and rub it into the scratch. Move the cotton ball around in a circular motion for a few seconds and rinse the toothpaste off with cool water. Use a soft, lint-free cloth to remove any moisture or toothpaste.
Does Ray-Ban replace scratched lenses for free?
If they are not covered, don’t fret! Ray-Ban will replace your broken sunglasses with the same pair for 50% off! The whole process is a win, win.
Are Ray-Bans Made in China fake?
Their factories in Italy and China produce Ray-Ban’s entire line of eyewear and Luxottica guarantees the quality of the products from its Chinese factories is in no way compromised; the glasses are made from the same materials, with the same machines.
How do you remove logos from glass?
In a small non metallic bowl, dissolve 1 tablespoon of citric acid in 2 tablespoons of very hot water. Mix in just enough flour to make a thick paste. Apply to desired area and let sit 5-10 minutes. After the paste has hardened and dried a bit, scrape or rinse the paste off the glass surface.
Are Ray-Bans cheaper in Paris?
If the brand is made in Europe it will be less expensive. If the brand is made in America and you are buying it in Paris you’ll have to pay the import Tax, thus making it more expensive.
Do real Ray-Bans have plastic lenses?
Firstly, Ray-Ban works with two types of lenses: glass or mineral and plastic. Among the advantages of glass or mineral lenses we find that they are more resistant to scratches, but that does not prevent us from being careful because they are fragile if they are hit too hard or fall to the ground, because they break.
How can I check my Ray-Ban serial number?
Ray-Ban alphanumeric serial numbers are always etched out of sight on the inside of the left-side arm and will ever be printed on the box in which they are packed.