Parts of a Corset: A Quick Rundown of Corset Terminology
- Busks.
- Bones.
- Channels and Panels.
- Grommets.
- Lacing.
- Lining/Strength Layer.
- Modesty Panel.
- Shell.
In this post
What are the metal things on corsets called?
A Busk is the rigid closure in the front of a corset. They are made of two long pieces of steel that can withstand the tension of corset lacing, one with eyes and the other with posts. They are available in a variety of lengths and widths.
Whats the back of a corset called?
Modesty Panel: The modesty panel is a piece of fabric that sits underneath your lacing. This will prevent any friction burns to your skin while you are tightening your corset. The modesty panel is also sometimes called a lacing guard.
What are the hard pieces in a corset?
BUSK (Split / Two part)
Made out of flat/spring steel they are rigid and provide the corset with vertical stiffening on the center front.
What are the rods in a corset called?
Bones are long, thin rods that provide the rigid structure of a corset. They are called bones because they were originally made from whale bones. These days, you can find versions made of steel, plastic, and other materials, but steel boning is preferred for waist training.
What do you call the hooks on a corset?
Loops on one side, and knobs (aka pins, aka pegs) on the other side, each side supported by a bone. Busks can come in a multitude of lengths, widths and colors.
What is boning in a corset?
Shape and support your garments with boning from WAWAK Sewing Supplies. Boning is a long, flat piece of metal or plastic used on the inside of garments for shaping corsets, dress bodices, bathing suits, and other garments.
How many layers are in a corset?
three
All Timeless Trends corsets have three fabric layers, two of which are strong cotton twill.
What is used to close a corset?
Busks are the gold standard in corset closure. Imagine if your exes made honest listings of everything that went wrong in your relationships and accepted full accountability for their part in it. Busks are the corsetry equivalent of that blissful sense of closure.
What is a corset with a bottom called?
Elizabethan Corset
You can easily recognize this corset because of the scalloped bottom, flat sides, shoulder straps, laced back, and cone-shaped torso. Its length ends at the waist, giving you well-defined hips.
What is a busk in corset making?
A busk is the front closure of a corset. Busks come in various lengths, shapes and colours so you can co-ordinate then with your fashion fabric, corset style and body type.
What is a boned bodice?
Boning consists of thin rods of stiff material, like steel, that are sewn into the fabric of the garment at intervals for the purpose of forcing the body to conform to a specific shape. Boning works with tight lacing to allow the wearer of a corset to create a desired shape.
What can I use instead of boning?
Plastic cable ties can easily be cut with household scissors, making it convenient and safe to use. No wire cutters! The ends don’t need to be tipped or capped, either. Just trim them into a rounded shape and file any rough edges with a metal nail file.
How many bones should be in a corset?
That said, the number of bones is typically dictated by the number of panels the corset features. There are usually two bones at the busks (one on each side), four bones at the laces (two on each side), and one bone for each seam between panels.
How do you put boning in a corset?
Stitch the casing to the fabric along both edges, creating a channel wide enough for the boning to slide into and narrow enough to keep the boning from twisting in the casing. Machine-stitch across one casing end before inserting the boning. Hand- or machine-stitch the opposite end after the boning is inserted.
What materials do you need for a corset?
Getting To Know Your Corset Making Materials and Equipment
- The Busk.
- The Awl.
- Waist Tape.
- Steel Corset Boning.
- Bone casing.
- Eyelet Setting Tool & Eyelets.
- Bias Binding.
- Where To Get Your Supplies.
How do you finish the edges of a corset?
The first thing to do with edging any corset is to edgestitch and trim the edge smooth. Make sure the edges of the corset halves match in shape and height. With the outside of the corset facing up, and the inside of the edging facing up, stitch the edging to the body of the corset at the intended edging depth.
What is the front closure of a corset called?
Busks
Busks refers to the front closures you see on most corsets. They are considered a traditional closure and use a simple loop and stud system to keep your corset closed. We use half-inch, flexible steel busks in all of our corsets.
What does a stomacher look like?
A decorated triangular-shaped panel that fills in the front opening of a women’s gown or bodice during the late 15th century to the late 18th century.
What is the triangle that came with my corset?
A stomacher is a decorated triangular panel that fills in the front opening of a woman’s gown or bodice. The stomacher may be boned, as part of a corset, or may cover the triangular front of a corset.
What is a Buske?
Busks were practical objects that existed to keep the female posture erect, to emphasize the fullness of the breasts and to keep the stomach flat.