Lapels (/ləˈpɛlz/ lə-PELZ) are the folded flaps of cloth on the front of a jacket or coat and are most commonly found on formal clothing and suit jackets. Usually they are formed by folding over the front edges of the jacket or coat and sewing them to the collar, an extra piece of fabric around the back of the neck.
In this post
What are the different parts of a jacket called?
Read on to learn learn what each part of a jacket is called so you can talk the talk when needed.
The front of the jacket
- Sleeve vent and buttons.
- Sleeve seam.
- Sleeve head (or cap)
- Collar notch.
- Front upper collar.
- Back facing.
- Collar roll.
- Back lining pleat.
What are the parts of a blazer called?
Every part of a blazer explained
- Shoulder. “A blazer’s shoulder defines its shape and how well it fits,” says Alice.
- Lapel. The lapel is the strip of fabric that runs from the collar down to the buttons and folds across your chest.
- Buttons.
- Pockets.
- Sleeve buttons.
- Hem.
What are the shoulders of a jacket called?
Modern derivations. Today, epaulettes have mostly been replaced by a five-sided flap of cloth called a shoulder board, which is sewn into the shoulder seam and the end buttoned like an epaulette.
What is the inner part of a jacket called?
Lining: The lining is inside the jacket and hides the seams while providing ease of entry into the garment. The lining may or may not house internal pockets.
What is the flap on the back of a trench coat called?
Storm (Gun) Flap – Assumed by many to be padding for a rifle butt, the “gun” flap is actually a protective flap to ensure water does not slip into the jacket as it runs down the shoulders.
What is a jacket cuff?
A cuff is a layer of fabric at the lower edge of the sleeve of a garment (shirt, coat, jacket, etc.) at the wrist, or at the ankle end of a trouser leg.
What is a storm flap?
noun. A piece of material designed to protect an opening or fastener on a tent or coat from the effects of rain. ‘In addition, the jacket features a security pocket hidden behind the storm flap.
Why do jackets have vents?
What are vents? For all those who are not familiar with the vent it is important to understand that they are located on the back of the blazer, jackets, suits or sports coats. The vents help to ensure that there is comfort while wearing the jacket and to not construct the body of the jacket.
What are jacket vents for?
If there’s a line in the sand when it comes to suiting, it’s usually drawn around the question of vents. No, these aren’t designed to keep you from sweating in a job interview; in suiting, vents are found on the back of the jacket and function as an opening to free up movement.
What are the straps inside my winter jacket?
The straps on the inside are to secure the jacket on your person while inside or not wearing the parka.
What are natural shoulders on a suit jacket?
A natural shoulder generally does not have roped sleeve heads, and can have a varied amount of padding. A soft shoulder, on the other hand, has little padding. To some, a soft shoulder has no structure at all, neither padding nor canvas. That would follow an unstructured jacket.
What is a back yoke on a jacket?
Definition- This is a piece of fabric that connects the back of a garment to the area across the back shoulders, allowing the garment to lie flat while following the reliefs of the body, ensuring correct drape and appearance.
What are flap pockets?
As far as construction goes, flap pockets are pretty much exactly what they sound like – a pocket with a flap closure over the opening. The flap is usually accompanied by a thin strip of trim stitched above the flap, and both the trim and the flap itself are fashioned from the same fabric as the rest of the jacket.
How do you put a hanging loop on a coat?
Sew up your jacket to the point of having attached your facings. Before topstitching the lining of your collar down, place your hanging loop on the seam and pin or baste in place. Basting it to the seam allowance at this point will give it a bit of extra strength. Flip the collar lining down and topstitch in place.
Are you supposed to open the back flap of a suit jacket?
Let that flap vent! Free your butt! Before you wear your spiffy new suit — whether it has a single or double vent — snip those stitches. Because they’re supposed to be removed, you’ll find that they’re pretty weak, which means you can just wiggle a finger underneath the “X” and pop it right off.
Why do coats have a back flap?
It serves a purpose, in that it keeps the coat from being pulled out of shape and getting wrinkled when it’s shipped to the store and hung on the rack for your perusal. But that’s all it’s there for.
What is the shoulder flap on a coat for?
Many military uniform shirts, jackets, tunics, or greatcoats feature shoulder straps. They were originally designed to keep back packs, ammunition pouches or bayonets from slipping off the shoulder.
Why do rain jackets have a flap on the back?
Storm Patch: In original trench coats, this flap served a double purpose, to wick away more rain and also to protect from the kickback of a rifle.
What is a gauntlet cuff?
Definition of gauntlet cuff
: a cuff (as on women’s wear) narrow at the wrist and flaring above in resemblance to the cuff of a gauntlet.
What is a barrel cuff?
Definition of barrel cuff
: an unfolded cuff (as on a shirt) usually fastened by a button.