Ideally, a minimum walk-in closet starts at 4′ deep x 72″ wide. 24″ deep x any width: Standard reach-in closet.
In this post
How wide is a standard closet shelf?
The most common reach-in closet is a 24 inch deep closet with a header. The header is the area between the top of the closet door and the ceiling. Unless your closet uses tall doors or doors that go all the way to the ceiling, a 12 inch shelf depth is recommended.
How deep is a typical closet shelf?
The ideal depth for a reach-in or wardrobe closet tends to be 10 to 12 inches for a closet that is 26-inches deep. A shelf depth of 12 to 14 inches can still be manageable for a reach-in closet that is more than 28-inches deep.
What is standard closet shelf spacing?
around 12 inches apart
Some Important Numbers to Keep in Mind. A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women’s shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
How wide are custom closet shelves?
Closet Systems and Components
Standard closet storage units are 24 inches wide, and come with two items (shelf or clothing rod) in any combination. You can choose to add extra shelves, rods or drawers to fit your needs.
How wide should a shelf be?
Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches.
Contact Us.
| Storage Item | Spacing | Depth |
|---|---|---|
| Small Paperbacks | 8″ | 8″ |
| General Reading | 10″ | 10″ |
| Videotapes | 10″ | 7″ |
| Magazines | 12″ | 12″ |
How deep should a shelf be?
As far as shelf size, a depth of 10 or 12 inches fits most functions without concern of drooping in the middle, while length should be determined based on where you want to install yours. If you want a long span but are concerned about weight, install adjacent, identical floating shelves, or opt for bracket supports.
What kind of wood do you use to build closet shelves?
Plywood. Whether you are replacing old cabinet drawers or are starting a project from scratch, one of the most versatile and dependable closet shelving materials you can use is plywood. This type of wood is a terrific choice for closet shelves because it’s very strong and resistant to sagging and warping.
How deep should shelves be in a walk-in closet?
Shelves and Drawers
The standard walk-in closet shelf depth is 12 inches, which happens to match the standard depth of kitchen cabinets. If you plan to keep shoes on a one-foot shelf, you may need to install a special shoe rack.
How many inches is between shelves?
The rule of thumb for spacing is 12 inches between each shelf but bump that up to 15 or 18 inches and you enhance that sense of exposure and accessibility.
How far should closet rod be from shelf?
Leave wiggle room between closet rods and shelves.
Say a shelf built into your closet obstructs the optimal rod placement position. If this is the case, mount the closet rod below the shelf, achieving a distance of at least two inches from the bottom of the shelf to the top of the rod.
How wide should closet drawers be?
Drawers for folded clothes should be set at a minimum of 18” (45.7 cm) with deeper drawers for multiple rows of folding clothing at a depth of 24” (61 cm). Deep drawers are consistent with standard closet depths 24” (61 cm).
How wide should wall shelves be?
In general, floating shelves should be between five and ten inches deep. However, there are much bigger sizes you can try, spanning from 12 inches up to 15 inches deep. With that said, most floating shelf designs call for longer, thinner dimensions, so you’ll have to do some research before making a purchase.
How wide can shelves be without support?
Bookshelf width is typically no more than 12 inches. If the space is limited, the shelf can be reduced to 9 inches. Single bookcase units with two sides, top and bottom should be no wider than 36 inches without a center support.
How thick should plywood be for shelves?
¾-inch
First and foremost, the wood you use for making bookshelves will impact the design as well as the cost of your project. ¾-inch plywood is considered the industry standard, thanks to it being strong yet inexpensive—especially when compared with some solid woods.
What is the best material to use for shelving?
Solid wood also makes an excellent shelf material. Maple is easy to stain and can be customized to match your decor. Cherry is lightweight yet strong and easy to cut. Birch is another solid wood that works well for shelves and shelving units, especially if you want to paint the finished pieces.
What is the minimum width for a walk-in closet?
4ft wide
A walk-in closet needs to be at least 4ft wide by 4ft deep – large enough to install at least three hanging rails in a U-shape. That would be the minimum; under the rail, you will need space for drawers or shelves, for shoes and a couple of baskets or boxes for accessories.
How high should open shelves be?
Design tip: If you’re wondering how high to place floating kitchen shelves, I typically like to place the first shelf about 18″ from the countertop. And if doing a 2nd shelf, I match the height of the bottom of the hood surround (typically 32″ from the countertop).
How tall should closet shelves be?
Closet Shelves & Rods: Rod & Shelf Height, Spacing & Design Tips
| Shelves and Rods | Measurement |
|---|---|
| Shelf height | 60 to 98 inches |
| Shelf depth | 11 to 15 inches |
| Single rod height | 60 inches |
| Double rod height | 80 inches top, 40 inches bottom, 3 feet apart |
How do you measure the length and width of a shelf?
How to Measure for Bookshelves
- Measure the height of the wall on which or against which you plan to put bookshelves.
- Measure the horizontal width of the wall space for the bookshelves.
- Determine how far you want the bookshelves to extend into the room, and measure that distance outward from the wall.