sock cymbal (plural sock cymbals) A pair of cymbals that can be closed or opened by means of a mechanism, such as a pedal mechanism.
In this post
Why is it called a sock cymbal?
It’s my understanding that they were called sock cymbals when used with “low” hat stands. Through the years high hats were also know as sock cymbals even though they were placed way above your “socks” level.
What cymbals have foot pedals?
the Hi-Hat
Origins of the Hi-Hat
The first spring-operated cymbal controlled by a foot pedal—called a “lowboy” at the time—made its way into the drum kits of jazz drummers in New Orleans in the early 1900s.
How does a hihat work?
The drop clutch is provided with a lever that can be operated by hand or struck with a drumstick. This action releases the upper hi-hat cymbal, which falls onto the bottom cymbal and remains there, with gravity then holding the hats loosely closed, and allowing them to be played by the sticks in this position.
Why is it called a hi-hat?
Hi-hats were so called because they were “high” compared to the then standard low-boy. The opening and closing resembled someone lifting their top hat. Snare wires come from the snares used to snare small game.
What is a hi-hat Clutch?
Standard clutches like the Ludwig L2508 Hi Hat Clutch or Yamaha LC-810A Standard Hi Hat Clutch allow you to attach your top hi hat cymbal to your hi hat stand, letting you open and close your hats with your pedal. Basically, they are central to making your stand actually work!
When should you use a hi-hat pedal?
The hi-hat pedal is used to create different sounds when striking the hi-hats, and to keep time for yourself and the band during a song. Use the wing nut to adjust the cymbals about an inch apart. If your foot is on the pedal holding the cymbals together, lift it up so the cymbals are not touching each other.
What does a hi-hat drop clutch do?
A device used on some hi-hat stands to release/drop the upper hi-hat cymbal so that it sits against the lower hi-hat cymbal, even when the hi-hat pedal is not depressed by the drummer’s foot. Drop clutches may be activated with a drum stick or using a locking hi-hat pedal.
How tight should hi-hat Clutch be?
A little loose gives a good “wash” too, when you want it. Rub your palms together…the looser you have the hats, the more of THAT action between the cymbals you get. The tighter the hats, the more the edges will stay in line with each other, and the result is more “clang” sound.
What does high-hat with foot mean?
foot hihat is stomping the pedal so the top and bottom crash together. Copy link CC BY-SA 3.0.
Why do drummers cross their arms?
Why Do Drummers Cross Their Arms? Many drummers cross their arms to allow their dominant hand to strike the hi-hat which is which is most frequently used. The hi-hat is usually placed to the left of the drummer and if right-handed, their dominant hand will need to cross over. Open-handed drumming can also be used.
Can you use a hi-hat as a crash?
You can do whatever you want. I’ve heard of people using 2 16″ crashes as hihats, the only real problem with this is placement. Using one half of a hihat as a crash wouldn’t be too bad, as long as you like the sound.
What is a tom in music?
What Is a Tom-Tom Drum? A tom-tom drum is a cylindrical drum that can be tuned to different pitches. Unlike snare drums, tom-toms don’t have snare wires, and they may only have one drumhead. Tom-toms are an essential part of the standard five-piece drum set.
How high should hi hats be?
6″-12″
Your hi-hat cymbal should be 6″-12″ above the playing surface of the snare drum. You should be able to strike the flat playing surface or edge of the hi-hat cymbal without hitting the snare drum. Be aware that moving the hi-hat stand will alter the symmetry of the tripod forming the foundation of your posture.
What is drum crash?
A crash cymbal is a type of cymbal that produces a loud, sharp “crash” and is used mainly for occasional accents, as opposed to a ride cymbal. It can be mounted on a stand and played with a drum stick, or by hand in pairs. One or two crash cymbals are a standard part of a drum kit.
Are all hi-hat clutches the same?
Hi hat clutches are not all interchangeable and you should check the diameter of the rod of your hihat stand before buying a clutch.
How far apart should hi-hat cymbals be?
About 3/4″ to 1″ on mine.
Should hi-hats be mono or stereo?
The kick and the snare should be mono, the open-hats and the toms should be panned, and the closed hi-hats can be both panned and stereo.
Why does my hi-hat sound tinny?
To check: the top hi-hat cymbal needs to be fairly tight on its fixings. They can come loose, allowing too much movement. There is an adjustment for the angle of the lower cymbal underneath it, which works using a small screw. There needs to be some small angle so the two can make more gradual contact.
What are trap hats?
Description. A Hat Trap is a must for Campaign style hat wearers. Protect your hat from sun and abuse when not in use. A Hat Trap also helps retain the flat shape of the brim. Molded grooves along the bottom allow leather straps to remain attached to the hat while in storage without affecting the flatness of the brim.
Where should hi hats be placed?
The best place for the Hi-Hat pedal is right where the foot that is playing it will naturally landwhile sitting forward with the Snare drum centered on the torso and the Kick drum positioned as previously mentioned.