Dress pants and wool trousers should fit perfectly around your waist with no need for a belt to hold them up. They should hit around the high hipbone area, or even slightly higher. You do not wear wool pants at the same waist as jeans – which are usually designed to sit lower.
In this post
How far should dress pants go down?
The hem of your pants with a half break should sit ½ – ¾” of the way down past the point where your pants first meet your shoes, allowing for a slight horizontal fold to make contact with the front of your shoes.
Where should dress pants fall when sitting?
Of course, you don’t want your waist to be too tight, either. If you feel squeezed at all, those aren’t the suit pants for you. For a proper pants fit, they should sit just at the top of or above your hipbone.
Where should suit pants come down to?
Your suit pants should sit high on your hip bone, or even higher, if you’d like to look taller. They’re not jeans, which are designed to hang low. As a rule of thumb, the waist should be tapered enough to avoid wearing a belt.
Are dress pants supposed to be baggy?
Dress pants should fit snug but not so tight that they cause discomfort. In fact, your pants should fit well enough to wear without a belt.
How high should pants be worn?
As a general rule, your trousers should sit just above your hips – the closer they are to this point the more flatteringly they will hang over your bum and flow down the leg. This is particularly true for those with wider hips – straight frames can get away with wearing their trousers a little lower.
How are suit pants supposed to fit?
Traditionally, suit trousers sit at the natural waist, which is right around the navel. Some men find this to be comfortable, others feel the opposite because they’re so accustomed to low-rise jeans that sit around their hips.
How high should pants rise when you sit?
The rise of trousers should sit above the hip bone or higher, in a mid- to high-rise, so that they pair well with a suit jacket. Low rise skinny pants of recent trends, when too extreme, throw off the proportions of a suit, elongating the body and shortening the legs.
Where should tuxedo pants fall?
Make sure the pants’ waist sits at your natural waist or right below your belly button. Your pants should have about a half-inch break, landing at the back of the shoe.
How do you know if your pants are too short?
Rule #2: Pant should never be worn too short. It’s all about the break. A good break is not only visually appealing, but it also lets you know if you’re wearing your pants too short. For example, if the break comes too high or is not defined enough, your pants will look too short when you stand or walk.
How long should your pants be by height?
Converting Metric Height to US Height & Recommended Inseam Size
| Your Height in CM | Your Height in Feet & Inches | Recommended Inseam Length |
|---|---|---|
| Up to 162.5 cm | Up to 5’4″ | 25″ inseam |
| 165 cm | 5’5″ | 26” inseam |
| 167.5 cm | 5’6″ | 26″ inseam |
| 170 cm | 5’7″ | 27″ inseam |
Where should men’s pants hem fall?
The hem of your pants with a half break should sit ½” to ¾” past the point where your pants first meet your shoes, this will allow a slight horizontal fold to make contact with the front of your shoes.
How long are suit pants supposed to be?
On this suit trouser version, it’s fine for the legs to end around 1.5 centimetres above the edge of the heels, which is around halfway up the heel of the shoe. The basic rule for your perfect trouser length is easy to understand and remember.
Where should dress pants fall on ankle?
To achieve a full break, the length of the trousers should reach well beyond the ankles to at least midway down the back of the shoe, and the opening width should be wide enough for the leg opening to fit around the laces.
Should you wear your pants over or under your belly?
Now, before you start copping grandpa pants that sit above your belly button, don’t. But, as a general rule, jeans should sit on the hips, while chinos and suit pants should land just above the hip, which will allow you to tuck in your shirt without worrying about it popping out mid-meeting.
Where should straight leg pants hit?
A standard pair of straight-leg jeans should be ankle-length or hit your legs right above your ankles. Straight-leg jeans that extend past your ankles tend to bunch up and look messy.
How loose should pants waist be?
There should only be about one finger of room at the waistband; just a little so they are not uncomfortably tight when sitting, but snug enough to keep them locked in place.
How do you know if your pants are too big?
(Image above, right) If you can’t lift up your legs or squat without feeling like your jeans might rip, it’s too tight. If you can grab a handful of denim from butt area, or confidently smuggle a football thanks to the extra room, it’s too big/baggy.
How far down should a suit jacket go?
Your suit jacket should cover about 80% of your butt and crotch. Generally, the bottom edge of a jacket should end between the two knuckles on your thumb. This rule can be pushed a little bit when wearing a casual sport coat because they tend to be a little shorter.
Should pants cover ankle?
Akshat Singh, a designer at a menswear store in Gurgaon, reiterates that the length of trousers is important and that “it should end above your shoes, showing an inch of your skin around the ankle.” He adds, “Our clients always ask for cropped trousers.
How high should mens dress pants be?
The classic fit, and conveniently, a work-friendly option is that you should be able to pinch about one to two inches of fabric on either side of your legs.