What Can I Use To Distress Shirts?

For an extra worn look, rub a pumice stone or sandpaper along these cuts. If you want to make the distressed areas of your tee stand out, use bleach (we used 2 parts water, 1 part bleach) to highlight the holes and cuts in the shirt. You can also use it all over the shirt for a grunge look.

How do you distress a shirt with a razor?

To make your own distressed shirt, take a disposable razor and drag across the portions of the shirt you’d like to distress. Finish by using a sharp pair of scissors to cut holes along the seams. Alternatively, drag a cheese grater across the shirt to create lots of small holes and rips.

How can I alter a shirt without sewing?

The Easiest No-sew DIY T-shirt Modification: Shorten the Sleeves. Cut along the sleeve’s hem, removing the stitching along with the extra length. The easiest and quickest way to improve the fit of a t-shirt is to shorten the sleeves.

How do you make a graphic tee look distressed?

There are a couple of ways to make a shirt look vintage. For the distressed look, use table salt, pumice, or bleach to make the color fade. This will also make ink used in motifs or designs crack and peel. Using a sharp razor, cut rips and tears into the garment to mimic a well-worn look.

How do you fade a decal on a shirt?

Shirt Fading Techniques

1. Step 1: Make your bleach “recipe”
2. Step 2: Prep your bleach solution.
3. Step 1: Make your bleach “brew”
4. Step 2: Gentle spin.
5. Step 3: Let it soak.
6. Step 4: Wash Cycle.
7. Step 5: Line Dry.
8. Step 1: Wash and dry.

How do you make a claw mark on a shirt?

Poke the seam ripper into the edge of one mark. Pull the seam ripper all the way through the hole until the fabric catches in the crook of the seam ripper. Pull the seam ripper across the mark quickly to tear through the fabric. Take care not to pull so hard that the fabric tears beyond your mark.

How do you make a shirt look dirty?

GREASE: Shoe polish. You can either break off pieces and use them like a crayon and just scrub the clothes with it or you can actually light it on fire (in the tin), let it melt a bit, blow it out, then scoop up melted polish on an old rag or sock and rub that onto the clothes as well.

How do I make my clothes look dingy?

For more controlled “dirtying” of clothes, I put a concentrated mix of instant coffee and tea in a spray bottle and saturate the areas I want to come out darker. You can control the strength of your stain solution by adding more or less instant coffee/tea powder.

How can I fade my clothes fast?

How to Make Clothes Fade Without Damaging the Fabric

1. Option 1: Hang or lay your clothes out in the sun.
2. Option 2: Wash clothes in hot water.
3. Option 3: Add liquid chlorine bleach when washing the clothes you want to fade.

How do you age a shirt with salt?

The pin says to dump 1/4 cup of sodium carbonate washing soda and 2 cups of salt into the washing machine with the T-shirts you want to age (or towels if you only want to age one shirt). Then you add your regular detergent and run the washing machine on the highest temperature.

How do you soften a shirt with vinegar?

1. Step 1: Make a mix. To make a vintage feeling T-shirt, first create a mix of water and salt, or water and vinegar in a large bucket.
2. Step 2: Submerge your shirt. Soak your shirt in the mixture for about seven minutes, Johnson says.
3. Step 3: Wash and dry as normal.

How do you soften fabric with salt?

Fill a large bucket or sink with lukewarm water, add 1/2 cup of salt per quart of water, and stir the mixture. Place your laundry into the solution and allow it to soak for up to 3 days. Then, wash it in your washing machine.

How can I fade fabric without bleach?

What Makes Clothes Fade And Why Fade Them?

1. Hot Water. Heat and friction make clothes bleed and fade out.
2. Hard water. Besides hot water, using hard water or water containing chlorine also makes clothes fade.
3. Air dryer.
4. Detergent.
5. To make them look vintage.
6. To create a variety of wardrobe choices.
7. To reduce stiffness.
8. Washer.