Bear in mind: If you’re taking in the calves of jeans as well as the thighs, the bottoms may need to be re-hemmed. Ask the tailor for an “original hem” to give jeans an unaltered look.
In this post
Is it worth getting jeans hemmed?
Hemming. Jeans that are too long will break up the style’s overall silhouette. The fabric can pool on top of your shoes and creating a bunched-up shape. Even worse, you’re more likely to step on jeans that are too long (and trip because of it).
How much does it cost to hem jeans?
Tailors and seamstresses are the hemming pros, and can typically hem your pants for anywhere between $15-$30 depending on the pants. While some people prefer to get them hemmed for them, many people enjoy saving a little money and getting the job done themselves.
How many inches can jeans be hemmed?
Most jeans have a 1/2 inch rolled hem. But if you like a deeper hem, you can make it up to an inch on a pair of jeans. Men’s jeans usually don’t have anything wider than that, but if you’re feeling fancy, go for it. But for this example, we’re doing the traditional 1/2 inch.
How much does it cost to alter the length of jeans?
Pants alteration price list
| Service | Price guide |
|---|---|
| Shorten | $10 to $20 |
| Lengthen | $20 to $30 |
| Re-hem | Around $18 |
| Taper | $10 to $50 |
How do you wear jeans that are too long?
What to Do If Your Jeans Are Too Long
- Wear Them Higher on Your Waist. If your jeans are too long, try wearing them higher on your waist.
- Shrink Them. If your jeans are both too long and too wide, you can try shrinking them.
- Roll Them Up.
- Choose Selvedge Jeans.
- Place Over the Top of Your Footwear.
- Buy Custom-Sized Jeans.
How long does it take to hem jeans?
As a professional seamstress, I have hemmed hundreds of pants. Jeans, suit pants, and everything in between has come through my shop. Some of these hems can be done in 15-30 minutes. Others take an hour or more.
Are jeans hard to hem?
Hemming jeans has a reputation for being hard . . . breaker of needles . . . shivers! Yet, it doesn’t have to be! The process of hemming jeans is just as simple as with any other pair of pants.
How can I make my jeans fit better?
8 Ways to Make Your Jeans Fit Tighter
- #1) Wash Them in Hot Water. Washing your jeans in hot water causes the denim fibers to contract and shrink.
- #2) Use a Steam Iron.
- #3) Place Them in the Dryer.
- #4) Boil Them.
- #5) Take a Hot Shower While Wearing Them.
- #6) Use a Hair Dryer.
- #7) Roll Up the Bottom.
- #8) Take Them to a Tailor.
Do you tip a tailor?
Tipping seamstresses is not standard protocol. That said, anytime a talented seamstress goes above and beyond, offering a gratuity is a thoughtful gesture.
Can you hem jeans and keep the original hem?
Fabric no longer bunches when hem is folded up! Having reduced the leg width along the inner leg, you can proceed with hemming the jeans with the original hem (same as the instructions for the straight leg jean). FOLD, PIN, SEW and CUT same as above. Frayed jeans are all the rage these days!
How do you get a worn look on the bottom of denim jeans after hemming?
Place your jeans face up on a flat surface. Insert a thin utility knife mat or piece of scrap cardboard between the layers of each leg to keep the cuts from going all the way through. Make slits or cuts with the knife or a pair of scissors. Turn the jeans over and repeat the process on the back bottom.
How do tailors hem jeans?
A sewing machine is used to sew the new hem. A straight stitch is applied evenly across the folded portion of the jeans the entire way around the leg. Once complete, the sewing is tied off and the threads are cut. The jeans are now hemmed, and ready to be turned back right-side-out.
Should I cut the hem off my jeans?
Essentially, cutting off the hem of my jeans creates a raw edge with just the right amount of distressing to where they have a laid-back look but can still be dressed up.
Should jeans show ankle sitting?
If you’ve cuffed them so that they still graze the top of your foot when you’re standing, then it’s okay for your ankle to slightly peak when you sit.
How long should jeans be without shoes?
Generally, jeans should be long enough to reach the tops of your feet with a little extra fabric, but short enough that the hems aren’t dragging on the ground. Jeans promote an effortless style, so their fit should reflect that.
Should you turn jeans up?
“Turn-ups are obviously good for cycling, because they keep the trouser bottoms from fraying on the chain. But if your jeans are tapered or slim like the ones here, they might be narrow enough not to catch on the chain even if you don’t turn them up.”
Can I hem my own pants?
If you don’t have a sewing machine or needle and thread, you can hem your pants with hem tape, which you can find at most drugstores. To use hem tape, turn your pants inside out, fold them to the desired length, pin and iron the crease, and then apply the hem tape to the fold. Iron over the folded edge.
How do you hem a woman’s pants?
How to hem pants in a few steps:
- Measure your inseam to find the right length.
- Remove the original hem.
- Measure the amount of excess fabric and trim it.
- Fold the new hem.
- Sew new hem by hand or with a sewing machine.
How do you keep raw hem jeans from fraying?
To get perfectly frayed hems:
Throw your jeans into the washing machine and dryer to get a fluffier frayed edge, and then trim off any too-long threads if needed. As an optional step to prevent further fraying, you can try applying an anti-fray product along the hems and letting them air dry. Hope this was helpful!