The only common use for the word “jamb” is to label the vertical part of the frame of a door or window. It comes from the French word for “leg”; think of the two side pieces of the frame as legs on either side of the opening. For all other uses, it’s “jam”: stuck in a jam, traffic jam, logjam, jam session, etc.
In this post
What is door jam?
A doorjamb, door jamb (also sometimes doorpost) is the vertical portion of the door frame onto which a door is secured.
What does jamb mean on a door?
A door jamb is an individual section of a door frame. Two side jambs make up the vertical components of the door frame and the head jamb is the top horizontal component. Together, the jambs (along with mullion) comprise the door frame.
How do you spell a door jamb?
either of the two sidepieces of a doorframe.
Is door jam one word or two?
“Doorjamb.” Merriam-Webster.com Dictionary, Merriam-Webster, https://www.merriam-webster.com/dictionary/doorjamb.
What is the frame around a door called?
The frame (sometimes called a jamb) is made up of three separate pieces and surrounds the door creating a “frame” in which the door can sit. The two vertical frames are called side jambs, and the horizontal frame is referred to as the head jamb. Frames are made up of composite material or solid wood.
What are the parts of a door called?
Parts of a Door
- Doorway. A doorway is one of the easiest parts of a door to see.
- Door Frame. A door frame is what supports the door and consists of the head, jamb and sill.
- Head or Door Head. The door head is a horizontal section of the door frame that is located at the very top.
- Door Panel.
- Jamb.
- Sill.
- Threshold.
- Rail.
What’s another name for door jamb?
What is another word for door jamb?
| gatepost | support |
|---|---|
| piling | stilt |
| standard | bollard |
| pilaster | baluster |
| jamb | pedestal |
Why is it called a jamb?
Door jambs are the interior sides of the doorframe. The word “jamb” comes from the French word jambe, which means “leg” – and door jambs are sometimes also called the “legs”. One source of confusion is the part of the frame above the door, which is sometimes erroneously referred to as the “top jamb”.
What jamb means?
Definition of jamb
1 : an upright piece or surface forming the side of an opening (as for a door, window, or fireplace) 2 : a projecting columnar part or mass.
What is a car door jamb?
The doorjamb is the part of the car where the door attaches to the frame of the vehicle. It acts as a seal between the interior and exterior of the car, protecting it from dirt and dust. Car companies use a layer of grease to help the mechanism work efficiently and quietly. This layer of grease can also attract dirt.
What is a jamb on a window?
Jambs are the main vertical parts forming the sides of a window frame. Sill. A sill is the main horizontal part forming the bottom of the frame of a window. Jambliner. A jambliner is a strip which goes on the sides of a window frame that provides a snug fit for the window sash.
What does door frame mean?
Definition of doorframe
: the jambs and upper transverse member enclosing the sides and top of a doorway and usually supporting a door.
What is door casing?
What is casing? Quite simply, it’s a moulding profile which frames (or trims) a door or window. Casing is functional as well as decorative. The main purpose of casing is to surround all doors and windows, covering any space or gap left between the drywall and frame.
What is the gap between door and frame called?
Gap tolerance is another term for the clearances between the door and frame. Interior door dimensions remain the same of 1/8-inch around the sides and top and 1/2-inch to 3/4-inch at the bottom. This terminology is helpful for your project specifics.
What are the different types of door jambs?
Four types of door jamb profiles were prepared: solid, finger- jointed, finger-jointed + face-wise lamination and finger-jointed + edge-wise lamination (Figure 1).
What is the difference between a door jamb and casing?
They’re usually rounded on one side and flat on the side that contacts the door. Their purpose is to stop the door from swinging the wrong way. Casing is the trim nailed to the jamb and the wall. It’s there to hide the gap between the jamb and the part of the door frame that’s behind the drywall.
What is bottom of door frame called?
Threshold. Located at the bottom of the door frame, the threshold is the area you cross to pass through the door. It contains the door sill.
What is the thing that keeps the door closed called?
A deadbolt is a locking mechanism that mounts much like a door knob. Most exterior doors are locked with a door knob, and also a deadbolt. The deadbolt bore hole is directly above the door knob hole. When a lever is turned, a solid steel cylinder is inserted deep into the door jamb to securely lock the door.
How thick are door jams?
4-9/16 inches
Standard interior door jamb thickness on pre-hung doors is 4-9/16 inches. The door jamb is the frame that installs in the wall and supports the door via hinges. This thickness is designed for installation in a standard two-by-four wall (constructed by studs that are actually 1½ inches by 3½ inches).
Is JAMB a valid Scrabble word?
JAMB is a valid scrabble word.