The length of your foot in inches —from the heel to the tip of your toe—is what actually determines your sock size. So when you see socks labelled “sock size 9-11” or “sock size 10-13”, just note that this is in reference to your foot length in inches, not your shoe size.
In this post
How do you measure for socks?
To measure your foot for socks, measure the length from the heel of your foot to the tip of your longest toe. The measurement in inches correlates to your sock size. For example, if your foot is 10 inches long, a sock size 9-11 should fit you comfortably.
How do you figure out how many stitches for a sock?
If you knit from the top-down, as a rule of thumb, you’ll need to cast on around 14 or 15 stitches per needle (56 or 60 stitches total) if you have a regular woman’s size and 16 or 17 stitches per needle (64 or 68 stitches total) for a regular men’s size.
How do sock sizes work?
In the US, a numerical sock size is essentially how long your foot is in inches. This means that a sock size labeled 9-11 is often not a shoe size, but rather how long your foot is in inches. For example, a women’s size 7 shoe is about 9 5/16 inches, so it would fit that size sock no problem.
What size socks do I need?
Feel free to measure your foot length with a measuring tape or just check your shoe size. If your shoe size is between size US 5-10 or European 36-41, you can easily wear 9-11 sock size. And if your shoe size is US 10+ or European 42+, get men’s socks of size 10-13.
How long should I knit the foot of a sock?
Knit the cuff to your desired length (1 to 2 inches for anklets, 6 to 8 inches for standard socks). Keep in mind that if you make very long cuffs, it may be necessary to start out with more stitches, because your leg gets wider toward the top.
How many stitches do you cast on for toe up socks?
The Fingering-Weight Toe-Up Sock for Adults calls for 56 stitches around the cuff for a medium, or 28 stitches on each needle. Find a cable pattern that is 4 or 7 stitches wide, and work it along the top of the foot, knitting the sole of the foot in Stockinette stitch, and then work the cables around the entire cuff.
What is a sock ruler?
It’s an innovative measuring tool for sock knitters that goes inside of the sock, allowing it to lie flat and ensure accurate measurements (both metric and imperial.) It’s easy to use, no tape measure blues, and it’s made in the USA! Knitting from the cuff down, The Sock Ruler® will measure: Length of cuff.
How do you use the horn and twig sock ruler?
Use the center slot opening to measure as you knit—simply slip the ruler into your sock, peek through the middle, and make sure both the front and back are level and at the same height. For knitting toe up, use this ruler to measure: From toe to start of heel. From finished heel to start of cuff.
What size socks for mens size 11 shoe?
Men’s sock sizes
| US sock size | General sock size | US men’s shoe size |
|---|---|---|
| 9-11 | Small | 4-7.5 |
| 10-13 | Medium | 8-12.5 |
| 14+ | Large | 13+ |
What size is XL socks?
Overview of All Sock Sizes
| US | ||
|---|---|---|
| M: | medium | 7 – 8 |
| L: | large | 8½ – 10 |
| XL: | extra large | 10½ – 11½ |
| XXL: | extra extra large | 12 – 13½ |
How much do socks add to shoe size?
His Brannock with 2 pairs of socks on is 20 C. We put him in a pair of size 20 shoes and he’s been playing comfortably ever since.
How Socks Impact Shoe Fit.
| Forefoot Fit Pressure | |
|---|---|
| Nylon | 7.1% increase |
| Thin Athletic Sock | 49.6% increase |
| Cotton Crew Sock | 48.5% increase |
| Hiking Sock | 67.1% increase |
What shoe size is sock size 10 13?
Men’s socks are typically listed on sock packaging as “Size 10-13.” This translates to a men’s U.S. shoe size of about 8-12.5.
Do socks size matter?
It is very important to wear socks that fit properly. If they’re too big, they can leave too much fabric at the toes, causing discomfort, and they can potentially sag and fall down off the calf or ankle (depending on the length of the sock).
How long is a size 10 sock?
The finished sock circumference depends on how stretchy the stitch pattern you choose for your sock is. As a rule of thumb, stockinette socks should be made with approximately 10% of negative ease.
Kids.
| Shoe size (US) | Foot length (inch) | Estimated foot circumference (inch) |
|---|---|---|
| 10 | 65⁄9 | 7 |
| 11 | 68⁄9 | 72⁄3 |
| 12 | 72⁄9 | 72⁄3 |
| 13 | 75⁄9 | 72⁄3 |
What is the length of a sock?
They typically sit up 8–9 inches when measured from the ankle, coming up to the midpoint of the leg. You’ll sometimes see these labeled as crew length, as they are both meant to be worn with pants.
How do you adjust a sock pattern?
Perhaps the easiest way of adjusting the sock size is knitting them with either a thicker or thinner yarn than stated in the pattern. For example, if the pattern calls for a fingering weight yarn, you can make larger socks by choosing a sport or DK weight yarn instead.
How much yarn do I need for a pair of socks?
The rule of thumb is that for an average pair of adult socks you need 100g of sock weight (fingering weight yarn).
How long is a men’s size 12 sock?
| ..Men’s Shoe Size.. | …Leg… | Total Foot Length |
|---|---|---|
| 12 | 7 7/8″ | 11 1/4″ |
| 12 1/2 | 8 1/8″ | 11 1/2″ |
| 13 | 8 1/4″ | 11 5/8″ |
| 13 1/2 | 8 1/4″ | 11 3/4″ |
How tight should knitted socks be?
Socks should be worn with a little bit of negative ease—that is, they should be smaller than the foot (and leg) they’re to cover. You want the sock to have to stretch a bit so that it will stay up on your leg and stay in place on your foot.
How do you calculate negative ease for socks?
Adult socks – should have 1″ / 2.5 cm negative ease in the foot and calf circumference & 0.5″ / 1.5 cm shorter than the foot length. Children’s sock – When making socks for children, you should have 0.5″ / 1.5 cm negative ease in the foot circumference and calf & 0.25″ / 0.63 cm to 0.5″ / 1.5 cm shorter in length.