Interestingly, the reverse is true about engravings on the back side of the clasps of both watches. This time, the back side of the clasp on the replica can have an engraving of the words “STAINLESS STEEL”, while the back side of the clasp on the authentic Rolex has no engravings whatsoever.
In this post
Can a Rolex be stainless steel?
While hard to find by walking into an authorized retailer, there are plenty of stainless steel Rolexes on the secondary market. WatchBox currently has over 100 different models including stainless steel Daytonas, stainless steel Datejusts and stainless steel GMT-Master II watches.
Do real Rolexes say Swiss made?
Almost all Swiss watches have “Swiss Made” or “Swiss,” sometimes surrounded by Ts, at six o’clock on the dial in small font. This may be hard to see with the naked eye. Every part of a Rolex is made in-house, so it should not have any parts that are not made in Switzerland.
Do a real Rolex tick?
Listen closely. If you hear loud ticking from your watch this Rolex is a definite fake. Rolex watches do not make the ticking noises common with other watches. Counterfeiters can’t often perfect the gears and so a ticking noise is made and this can really help you spot fakes quite easily.
Are all Rolex watches stamped on the back?
Most Rolex watches do not have engraved words on the caseback. The few exceptions to this rule are the Sea Dweller, military watches, COMEX, and other very rare editions. Older Rolex models like 69172, 69173, and 69174 also have engravings on the back with “Stainless Steel” and “Registered Design”.
What Rolex is stainless steel?
904L
For many years Rolex used the popular stainless steel grade 316L, which is the standard for round 95% of the watch industry. In 2001 however, they changed from using 316L to 904L and are currently the only watchmaker in the world to use this grade for their watchcases.
When did Rolex start using 904L stainless steel?
Rolex themselves has stated, “In 1985, Rolex became the first watchmaking brand to use this steel from the 904L family for its cases.”.
What steel is used on Rolex?
904L steel
A Rolex watch must work perfectly and maintain its beauty even in the harshest environments. That is why Rolex uses Oystersteel, a steel alloy specific to the brand. Oystersteel belongs to the 904L steel family, which is particularly resistant to corrosion and acquires an exceptional sheen when polished.
What is the cheapest Rolex you can buy?
36mm Oyster Perpetual
What Is The Cheapest Rolex. The cheapest Rolex is the 36mm Oyster Perpetual which costs $5,800 MSRP. The Oyster Perpetual is a no date stainless steel sports model that is considered the most affordable or entry level men’s Rolex.
Does a real Rolex have a green sticker on the back?
Rolex used the green holographic sticker for decades but stopped with them in late 2007. Now, the green holographic Rolex caseback stickers were replaced by a transparent sticker. Therefore, Rolex watches that are dated after 2007 should not have the green sticker on the caseback.
How much is a Rolex really worth?
The cost of a Rolex can range anywhere between $6,500 all the way up to $75,000 MSRP. Factors that affect pricing are materials, new movements, collection popularity, and complications. The average price for most Rolex watches falls between $7,000 – $12,000 MSRP.
Can you shower with a Rolex?
All you have to do after diving or a day at the beach is simply to rinse your watch with fresh water to remove any salt and sand deposits: wearing your watch while showering at the end of the day should do the trick. The Oyster case of your Rolex protects it from water and makes it completely dustproof and waterproof.
Does a real Rolex have a battery?
Rolex watches are powered by a Perpetual rotor inside the watch that gently swings as you move your wrist, transferring energy to the mainspring of the watch. If you take your watch off and set it aside it will retain its charge for about two days, depending on the model.
How do I identify my Rolex?
Rolex watches include a serial number stamped between the watch lugs at the 6 o’clock position. You will need to remove the bracelet in order to find this. An authentic watch will have a deeply engraved serial number. You should be able to hold it to the light and see a slight glow around the edges.
How much does a real Rolex weigh?
Weight and feel
Just as an example, an original Rolex Stainless Steel Submariner weighs approximately 153 grams, whereas a counterfeit only weighs around 124 grams.
Why is there a stainless steel shortage on Rolex?
The simple and short answer to the question of why there is a shortage of Rolex professional models – in particular, stainless steel sports models, is that the demand exceeds the supply. In other words the number of watches that Rolex manufacture.
Does Rolex scratch easily?
Wearing and using your Rolex watch will result in scratches. However, there are steps you can take to avoid scratching. For instance, you can lay your Rolex on a soft cloth or in its box at night.
Is stainless steel better than white gold?
Stainless steel, in its soft, fully annealed state is about 155 Vickers, but at full hardening can reach 390 Vickers, which is 70 percent harder than platinum or white gold. This means that stainless steel will resist wear, dents, dings, and scratches better than either white gold or platinum.
What is better 316L or 904L?
If we were to look at specifications alone, it’s easy to say that, actually, 904L is indeed the superior alloy. It has incredibly high corrosion resistance. This is critical for some applications, but 316L is more than enough for most luxury watchmaking.
What does 904L mean on Rolex?
904L is a low-carbon, high alloy stainless steel, with additives of copper, chronium, nickel and molybdenum. Most commonly used in the aerospace and chemical industries, 904L has excellent anti-corrosion properties, that are comparable to those of precious metals.
What did Rolex use before 904L?
316L
It wasn’t that long ago that Rolex ditched 316L to 904L. For years, 316L was hailed for its ability to ward off salt water and acidic liquids due to its low carbon content. But around 2000, Rolex noticed that salt water was actually worming its way into the caseback threads and watchband.