Keep in mind that compounding or wet sanding does remove clear coat. Many detailers feel you have some wiggle room with the UV layers in the clear coat; however, one-third of the thickness of a Ziploc sandwich bag isn’t much at all, and one color correction is not the end of it.
In this post
Can you wet sand over clear coat?
A clear coat needs to be waxed and maintained to keep its luster, but you may eventually have to wet sand it to restore its original finish.
Does sandpaper remove clear coat?
When doing auto body work, it’s best to start with sandpaper of a lower, rougher grit. Doing so helps remove more clear coat, saving time, and helps wear down any imperfections. Remember: finer sandpaper has “finer” — or higher — grit numbers, and vice versa.
What grit sandpaper should I use to take off clear coat?
Sand the clear coat using 800 grit sandpaper and allow it to stay on the rough. Reduce the sanding intensity as you move away from the damage.
How do you remove clear coat without damaging paint?
Answer provided by
- Soak 400-grit sandpaper in water.
- Tape off delicate surfaces of the vehicle that you don’t want to affect.
- Wet sand the clear coat thoroughly.
- Then, dry-sand it.
- Rinse the sanded car off, and polish the sanded portion.
- Finish by cleaning off the polished area well.
Why is my clear coat not glossy?
Once clear coat is applied you need to sand it with low grit wet and dry sand paper and then rub it out with low grit rubbing compound. This is how you will get it to shine. You will want to get some of this sandpaper in 1000 to 3000 grit levels as well as some rubbing and polishing compound.
What grit should I wet sand with?
between 600 and 1,200
What Grit Sandpaper Should I Use? When you’re first beginning to wet sand your material, you’ll want to start with a grit between 600 and 1,200. Once you choose your starting grit, you’ll follow dry sanding standards to increase the by 200 to 500 grits per pass to get the finish you want.
Does wet sanding damage paint?
Wet sanding can cause damage to the paint of the vehicle if not done correctly, so take your time as you progress through the process.
What causes orange peel in clear coat?
What is the orange peel effect in paint? The name orange peel is given by the resemblance of the final paint finish to an orange peel. This problem is caused by the lack of stretching or levelling of the paint, resulting in a deformed surface and in an increased thickness of the final coat.
Can you wet sand clear coat with 600 grit?
600 grit is aggressive enough to sand it flat without doing any damage to the clear coat. Remember, it is plastic, so too coarse of sandpaper can get very difficult to remove scratches from.
What is the best way to remove clear coat from a car?
How to Remove Clear Coat
- Pick a suitable work area.
- Wash the area to be treated.
- Rinse and dry it off.
- Clay bar the area.
- Wash, rinse, and dry it again.
- Prepare your sandpaper or scratchpad.
- Put your safety gear on.
- Wet-sand the area, blending if needed.
Can you sand clear coat and respray?
The bad news is, you can’t just sand for adhesion and respray clear coat. Modern urethane paints are thermoset paints. This means that once they “dry” they won’t flow again. The clear coat creates a strong chemical bond with the still slightly “wet” paint and locks in.
Do you wet sand clear coat before buffing?
Begin to wet-sand the clear coat. The clear coat should be wet-sanded with 400 grit sandpaper. This is to replace the orange peel with finer and finer scratches, which will eventually be filled in with polish. The sanding steps help diminish the clear coat until the entire surface is smooth.
Do I need to remove all clear coat before paint?
Can you paint over clear coat directly? No. Like I said, you can paint over clear coat but you’ll need to sand off a layer of the clear coat before applying paint. If you want to paint over clear coat, get out your sanding block and wet sandpaper first!
Will rubbing compound remove clear coat?
Rubbing Compound
Both compounds can fix scratches by removing a thin layer of the clear coat.
How do you remove clear coat damage?
Mask off the repair area with masking tape, applying about 2cm outside the damaged area. Using an 800 grit sandpaper, sand down the rough clear coat until you can’t feel it any more. Go lighter on the surrounding clear coat as you want to smooth and blend the damaged area, not remove more clear coat.
How do you remove old peeling clear coat?
Use light to medium pressure and try to knock off all the peeling flakes. If the color coat is exposed, use very light pressure and focus on the borders. You can also use fine sandpaper – test with 1500-grit and go up or down depending on the hardness of the specific clear coat.
Is wet sanding better than dry sanding?
Wet sanding, which is sanding with the addition of water to act as a lubricant, is less abrasive than dry sanding, and results in a smoother finish. It’s best to wet-sand the final finish of a project. Dry sanding removes more material, and smooths rough material quickly.
What is the purpose of wet sanding?
Wet sanding is a process where we use special sandpaper that is supposed to be wet with water. Very wet. The water acts like a lubricant plus helps remove tiny particles so that the sandpaper does not get clogged and create deep scratches. Granted, the act of sanding does create small scratches.
Is wet sanding good for a car?
Wet sanding is the process of removing paint scratches from your vehicle, and it helps restore the paint’s sheen. In a new car, wet sanding can help remove the orange peel effect (i.e. pebbled, uneven painted surface- kind of like an orange skin). However, remember that wet sanding cannot get rid of deep scratches.
When should you wet sand a car?
Wet sanding can be used when your vehicle has a dull finish. It helps remove tiny scratches and imperfections in the clear coat that aren’t individually visible but can cause the original shine to lose its sparkle.