YOKE DEPTH Measure diagonally from neck to underarm — running your measuring tape from wherever the top of your raglan seam will hit you down to your underarm — and take that lower measurement from about an inch or two below your actual underarm.
In this post
Where do you measure yoke?
Yoke. The yoke is measured from the outside seam, where the yoke joins the sleeve, across the top of the shoulders (below the collar) to the opposite side. The yoke should fit comfortably on the “outside edge” of the shoulders. The tape should not drop below the prominent neck bone.
How deep should the yoke of a sweater be?
The yoke’s neck circumference is roughly 40-45% of the body circumference. Lastly, as observed in Elizabeth Zimmermann’s The Opinionated Knitter, the yoke depth is approximately one half of the sweater’s body width, with an upper limit of approximately 10-11″ total yoke depth.
What is the yoke in knitting?
The seamless yoke style is the simplest top-down sweater to knit in the round. Stitches are cast on for the neck circumference, then increased evenly spaced in four intervals to the widest circumference at the armhole depth. During the yoke, there is no definition between the front(s), back, and sleeves.
What is the yoke width?
Otherwise known as the yoke width, you can measure the shirt shoulder width by taking a buttoned up shirt, flat on the floor, and measure on the back, the point from where the yoke meets the sleeve, straight over to the same point on the other side.
How many are in a yoke?
A sulung was the amount of land which could be ploughed by 4 ox-pairs (or approximately 2 hides), therefore a yoke was a pair of oxen, representing the amount of land that could be cultivated by an ox pair. A yoke also described the device used to harness two oxen together (see photo).
What is back yoke depth?
Center Back Yoke Depth – at CBN, measure straight down from neck seam to yoke seam. Cuff/ Sleeve Hem Height – Measure from seam or stich line to cuff edge. Extended sleeve/cuff opening – Measure straight across, seam to seam, with all fullness pulled out.
How do you measure yoke depth?
YOKE DEPTH
Measure diagonally from neck to underarm — running your measuring tape from wherever the top of your raglan seam will hit you down to your underarm — and take that lower measurement from about an inch or two below your actual underarm.
What is the yoke of sweater?
A yoke sweater is a circular sweater that is typically knit from the top-down (but can also be knit from the bottom up) and are often featured with a geometrical pattern around the neck. Karen Templer’s article on round-yoke sweaters is also worth a read for further discussion on their construction.
What is the major diameter on a end yoke?
1760 Full Round Spline Size: 2.390″ – 46 Major Diameter: 2.390″
What does a yoke look like?
A bow yoke /ˈboʊ/ is a shaped wooden crosspiece bound to the necks of a pair of oxen (or occasionally to horses). It is held on the animals’ necks by an oxbow, from which it gets its name. The oxbow is usually U-shaped and also transmits force from the animals’ shoulders.
Why is it called a yoke?
The oldest use of the word seems to be the wooden bar to connect a pair of oxen used sometime before the 12th century. So maybe the “yoke” was adopted at the moment that two control devices were connected together for two pilots.
What does back yoke mean?
noun. 1A chair back resembling a yoke in shape, having a curved top rail with protruding ends; (also) the chair itself. Frequently attributive, especially in “yoke-back chair”. 2A part of a garment shaped to fit over the back of the shoulders or around the back of the hips.
What is a rear yoke?
Definition- This is a piece of fabric that connects the back of a garment to the area across the back shoulders, allowing the garment to lie flat while following the reliefs of the body, ensuring correct drape and appearance.
What is actual measurement in knitting?
If a pattern lists that the sweater has an actual finished bust circumference of 40″, if you measure it, it will be 40″ around at bust height—that is, the front and back will each be 20″ across.
Where do you measure your bust when knitting?
Chest/Bust – Measure around the fullest part of the chest/bust. Do not draw the tape too tightly. 2. Center Back Neck–to-Wrist- With arm straight, measure from back base of neck, across shoulder, and along arm to wrist.
How do I know my knitting pattern size?
The only way to know for sure what size you are is to take your measurements. Knitting patterns are usually sized by the finished chest or bust measurement, but sometimes the intended body measurement is given instead. In that case look to the schematic for the finished garment measurements.
When measuring knitting length do you include the needle?
Take the length you’re aiming for, and multiply it by that number. In this case, we’re aiming for 18 inches, so the calculation is 18 x . 93333 = 16.8 inches. That’s the length you should measure on your needles so that after washing the piece turns out to be the right size.
How long should knitted sleeves be?
Here’s how it goes: Measure around your arm where you want the sleeve to hit. Then figure out how big around you want the cuff to be, taking ease into account. So if you want the cuff to be a couple of inches bigger around than your arm—which is pretty typical—take your measurement and add 2 inches.
Do you include the rib when measuring knitting?
For an accurate measurement, place the ruler near center of the garment, not near the knitting needles or near the bottom edge. For example, if the project has a ribbed edge, you don’t want to measure near it.
How do you find the depth of an armhole?
Position the starting (zero) end of the tape measure flat against the the center of your shoulder. Draw the tape measure down over the front of your shoulder and arm, pausing once it hits the center of your armpit. This measurement is sometimes referred to as your Armhole depth.