A topping slab will need to be at least 1 ½” thick in order to accommodate the tubing plus some reinforcing mesh over the top and then to have about ¾” of concrete over everything.
In this post
How thin can a topping slab be?
Please keep in mind that any screed or topping slab needs to be an absolute minimum of 70mm thick. The maximum recommended thickness is 100mm. These recommendations are in place to ensure both the strength of the concrete and its longevity.
What are topping slabs?
A topping slab is a concrete slab poured over an existing subfloor, generally made of concrete or plywood. A topping slab is often intended to be purely decorative but nevertheless it has to maintain structural integrity. In order to do so, the minimum thickness needs to be 2″ (2-1/4″ on hydronic heat systems).
What is structural topping?
• Typically, a structural topping comprises a 50 mm to 75 mm thick layer of C25/30. normal weight concrete reinforced with A142 fabric reinforcement. The structural topping should not be confused with some types of screed that do not contribute any structural enhancement to the precast concrete planks.
Can I do 2 inch thick concrete slab?
A 2-inch concrete slab can hold 750 psi of weight. The stronger the slab will be, the more concrete is normally put at a thickness of 2 inches or more. A slab’s thickness is most commonly four inches. The stronger the slab will be, the more concrete is normally put at a thickness of 2 inches or more.
Does a topping slab need reinforcement?
For a bonded topping on an elevated structural slab, supplemental reinforcement added to the base structural slab in regions of negative moment will help control the width of any cracks in the structural slab that reflect through the topping slab.
How thick is concrete micro topping?
“Concrete microtoppings or concrete overlays are extensively used in the decorative concrete industry,” he says. “A thin-set topping is usually less than 1/8-inch thick after two or three coats. Each coat is about 1/16-inch thick.”
What is the minimum thickness of concrete slab?
The thickness of concrete floor slabs supported directly on the ground shall be not less than 31/2 inches (89 mm).
Can I pour concrete 1 inch thick?
Be sure you never make your slab thinner than four inches for any application. Six inches is the minimum thickness for a concrete slab that may see any kind of heavy vehicle traffic.
What is the minimum thickness of concrete slabs exclusive of concrete topping?
1.4 Minimum Thickness
For unbonded topping, the minimum thickness is 75 mm. Unbonded construction with a minimum thickness of 100mm is recommended if there are cracks in the base slab or if good bond is only partially attainable or totally lacking.
What goes on top of concrete slab?
Vinyl sheet: This vinyl type comes in a single sheet that is installed over the concrete floor slab. A vinyl sheet may be forgiving if your concrete slab isn’t perfectly even. Because it doesn’t include any gaps, this type of vinyl flooring offers the most moisture resistance.
What is a concrete topping?
Topping concrete is defined as a layer of high strength concrete placed on an old, worn out concrete surface to provide a dense, abrasion-resistant surface, to increase structural depth and strength of the base concrete. Fig 1: Section of topping concrete over existing slab.
Can I pour concrete on top of old concrete?
You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
Do you need rebar for 4 inch slab?
For 4” concrete slabs used for driveways and patios, #3 rebar is common. Driveways that will support daily traffic by heavy trucks frequently use 1/2″ or #4 steel bar.
Do you need rebar for 3 inch slab?
Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.
How big can a concrete slab be without expansion joints?
Rule #1 – Keep joints as square as possible. Rule #2 – In order to prevent intermediate cracking, space joints (in feet) no more than 2 – 3 times the slab thickness (in inches).
How thick is polished concrete floor?
Traditional Polished Concrete
It is a thick, heavy floor needing generally 75mm-100mm depth as a minimum and you will have to cut joints into the surface to allow the concrete to shrink in a controlled way.
What is the best concrete overlay?
Something like SunStone, Classic Texture, or Tuscan are all excellent products for concrete overlays.
Can you pour 1 inch concrete overlay?
There aren’t many reasons to have only a 1-inch thick concrete surface. It is too thin to use as a flooring just by itself; however if you need to resurface damaged concrete, a 1-inch layer is a good amount. The old surface is prepared so that the new concrete will adhere, then the new cement is added.
Can you put a thin layer of concrete over existing concrete?
Yes, you can put new concrete over old concrete providing there are no issues such as significant cracks of frost heaves with your existing concrete. A new layer of concrete should be about two inches to ensure an even, strong coverage.
How thick is concrete resurfacing?
1/2 inch thick
1 Unlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for compressive strength of about 4,500 psi.