Although Tilley have mercilessly pre-shrunk the Hat, the cotton and hemp will always contract and expand, much like denim jeans. When the Hat is dry, simply re-stretch it, by putting your knee in the crown, and pulling firmly on the opposite side.
In this post
How do I adjust my Tilley hat?
How do I make the hat tighter? Spread the knots on the back cord as far as possible. Gently pull on the front cord until the back cord is taut (stretching from eyelet to eyelet). With the back cord behind your head, put the hat on and adjust the back cord to the desired tightness.
Do Tilley hats run small?
The Tilley hat fits more comfortably than other hats – so it often looks better, too. It’s designed to be worn low on your head and slightly loose, and should be held on by gravity. If you already know your regular (non-Tilley) hat size, we recommend that you select one size larger when you order your Tilley.
How do you soften a Tilley hat?
Stretching your Tilley hat
Here’s how to give it a quick stretch if needed: When your hat is dry, stretch it by putting your knee in the crown and pulling firmly on the opposite side. Rotate the hat over your knee and repeat this process until all sides are stretched to your liking.
Are Tilley hats worth the money?
It is expensive but worth the money as it is very durable and well-built. It has decent sun protection and will stay on your head in gusty winds. Boating and golf are great activities for the LTM6 Airflo. This piece is not great for backpacking, because its stiff brim could hit the back of your pack.
Which way round do you wear a Tilley Hat?
Also, if you see the “TILLEY HAT” label on the right side when you put your hat on, it’s the right way up.
How do you stretch a hat at home?
Steps
- Heat up the tea kettle or pot of water until the water begins to boil.
- Hold the hat’s brim to get a good grip.
- Remove the hat from the heat for 30 seconds.
- Turn on the hairdryer to its highest setting.
- Once it’s mildly damp, wear the hat and let it air dry to stretch into the right size for your head.
How do you make a homemade hat stretcher?
Turn your hairdryer on its hottest heat setting and blow-dry until it is almost dry. Once the hat is damp, place it on your head to air dry to allow the cap to stretch and mold into the perfect fit. Make sure not to spray your hat until it’s dripping wet.
How snug should a hat be?
The hat should sit comfortably mid-forehead above your eyebrows and not obstruct your view. The sweatband inside the hat should provide a snug fit, not a tight fit. If you feel any tension or end up with deep red marks on your forehead, pick a looser-fitting hat.
What was the original Tilley hat?
An original Tilley hat with 40 years of history, the T3 is an outdoor favourite. Designed with a flat brim, circular crown and snap-up sides for an alternate aesthetic. The T3 looks great on everyone and is made with Cotton Duck fabric that is durable, naturally breathable and biodegradable.
Which Tilley hat has the smallest brim?
Tilley LT5B – Stone – Smaller Brim.
Do Tilley hats shrink when washed?
Although Tilley pre-shrink all their fabrics, fabric will always contract then expand, as do denim jeans. Whenever you’d like the Hat a bit looser – on those hot, muggy days, for instance – take it off and give it a quick re-stretch.
Can Tilley hats be folded?
This is one of the most impressive features of Airflo Tilleys. They will never be destroyed by angry baggage handlers. Flatten ’em, roll ’em, fold ’em. It’s all good, they’ll come back into shape.
Does Tilley replace lost hats?
Tilley offer a lifetime guarantee where they will repair or replace your freshly washed hat due to general wear and tear, poor workmanship or faulty material. This is not covered against misuse or improper care. Tilley also provide 2 years guarantee from purchase date that covers loss, theft or accidental damage.
How should a Tilley hat fit?
The Tilley Hat fits more comfortably than other hats. It’s designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead! If you can fit two fingers flat between your forehead and Tilley Hat then the size is correct.
Are Tilley hats made in China?
In 2018 Hilco Capital sold the company to Toronto, Canada based Gibraltar & Company. Since then, production has largely been shifted to China. The best known products of Tilley Endurables are their hats.
Are Tilley Hats good in the rain?
It will cause the hat to shed water for a while and is adequate for a day of drizzle or light rain. It doesn’t make the hat waterproof. But it does allow for some breathability.
How do you flatten a Tilley Hat?
To remove wrinkles from your Hat, fill the crown with warm water and swoosh it around. Wet the outside of the crown too. Shape by hand and air dry. Your Hat will travel wrinkle-free in the bottom of your luggage if you stuff the crown with socks and underwear.
How do I know what size Tilley Hat to buy?
The Tilley Hat fits more comfortably than other hats. It’s designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead! If you can fit two fingers flat between your forehead and Tilley Hat then the size is correct.
How do you stiffen a brim of a Tilley Hat?
Spray starch or fabric stiffener over the entire hat. If only stiffening the brim of a hat or ball cap, spray the brim only. Allow the hat to remain upright on the table until it dries completely.
How do you widen a hat?
Position the Hat Jack in the inside of your hat’s brim, then boil water to generate steam. Once the water is boiling, reduce the heat. Hold your hat over the steam as you crank the Hat Jack to expand the hat to the desired size. Before removing the Hat Jack, let your hat air dry for between 20 or 30 minutes.